Repair & Restoration

Akona^® Concrete & Masonry Dissolver

Akona® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Concrete & Masonry Dissolver can be used to safely remove cured concrete, mortar, grout, and stucco buildup from tools, concrete forms, job mixers, hardware, shoring, and more. This product deconstructs the bond between the Portland cement component, turning it into a soft paste-like mush that is easily removed from the surface. Available in 28 oz. spray bottle (BOM #121261).

Akona^® Power Patch Pro

Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)

Akona^® Wet/Cold Concrete & Masonry Loc

Akona® Wet/Cold Concrete & Masonry Loc is a two component, non-sag, high-performance anchoring adhesive for use down to 15°F (-9°C). Great for bonding new concrete to existing concrete, repairing structural cracks in concrete surfaces, and adhering dowel bars and tie bars for full depth concrete repairs.

Quikrete^® All-Purpose Gravel

Quikrete® All-Purpose Gravel (BOM #105521) is a multi-use product for a variety of decorative and landscaping applications. Also for making concrete.

Quikrete^® FastSet^™ All-Crete^™

FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).

Quikrete^® FastSet^™ Repair Mortar

FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]

Quikrete^® FastSet^™ Self-Leveling Floor Resurfacer

High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service

Quikrete^® FastSet^™ Water-Stop Cement

High Performance Cement FastSet™ Water-Stop Cement (BOM #113205) is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. FastSet™ Water-Stop Cement will block running water when application is made to masonry or concrete surfaces. This special formulation allows the product to obtain high strength and rapid setting while repelling water. FastSet™ Water-Stop Cement solves leakage problems wherever active water is present, in all masonry and concrete above and below grade. Use FastSet™ Water-Stop Cement for sealing around concrete pipes and for plugging leaks in: • Foundation and retaining walls • Chimneys • Swimming pools, fountains and cisterns

Rapid Patch^® Concrete Crack & Patch

Rapid Patch Concrete Crack & Patch is a heavy duty, fast-setting patching material for concrete block, sidewalks, patios, steps, and other concrete or masonry surfaces. This product is suitable for interior or exterior applications and may be trowel applied over existing concrete surfaces from a feather edge to a one half inch thickness to refinish the concrete surface.

Rapid Patch^® FlexCrete

Rapid Patch FlexCrete is a single component, polymer modified, Portland Cement based waterproofing mortar for use in applications where a flexible, durable watertight barrier is required. Flexcrete is designed to bond to concrete and masonry surfaces, is resistant to freeze thaw conditions and chemical and sulfate exposure.

Rapid Patch^® Hairline Crack Repair

Rapid Patch Hairline Crack Repair is a two-component, low-viscosity, 100% solids, urethane repair product designed for filling cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Product goes on black and dries gray. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).

Rapid Patch^® Moldable Concrete Repair

Rapid Patch® Moldable Concrete Repair is a fast setting, general purpose cement-based patching material for repairing concrete and masonry. Moldable Concrete Repair is a proprietary blend of Portland cements, aggregate and additives that achieve an initial set in 10-15 minutes; final set in 20-25 minutes. It can be shaved down for a more uniform looking repair after the initial set. Primary applications include drive-ways, walkways, stairs, patios, pool decks, basement floors and garage floors.

Rapid Patch^® Rapid Loc^™ Concrete & Veneer Bond

Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).

Sakrete^® Pro-Mix All-Purpose Cement Mix

Pro-Mix™ All-Purpose Cement Mix is a fast setting, high performance concrete repair material that is shrinkage compensating, and high strength. Just add water to produce an easy to use mix ideal for repairs where short down times are critical and high durability and rapid strength are needed. Available in 20 lb. pails (BOM #113014) and 50 lb. bags (BOM #112704).

Tenon^® 40% Silane Sealer

Tenon® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect, and seal fully-cured fresh concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure.  Available in 1 gal. bottle (BOM #129870), 5 gal. pail (BOM #129860) and 55 gal. drum (BOM #129597). 

Tenon^® Critical Pavement Repair (CPR)

Tenon® Critical Pavement Repair (CPR) is a preblended, single-component, repair mortar designed to be a quick, durable repair for essential heavy-duty surfaces. This includes airport runways, concrete highways, parking structures, freezer rooms, loading docks, industrial floors, and much more. It is fast-setting, high-strength, polymer-modified, and fiber reinforced as well as freeze-thaw durable. CPR contains corrosion inhibitors to mitigate corrosion issues. It can be trowel applied on horizontal or vertical surfaces or pumped into place for formed vertical and overhead repairs. Meets ASTM C928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs. Available in a 50 lb. bag (BOM #113091).

Tenon^® FormGuard

Tenon® FormGuard is a V.O.C. compliant, ready-to-use, petroleum based, chemically reactive liquid concrete form release agent. Tenon FormGuard effectively prevents bonding of concrete to forms and formliners. Use of Tenon FormGuard regularly will increase the life of all forms. Tenon FormGuard can be used on forms such as steel, aluminum, fiberglass-reinforced, all grades of plywood, epoxy-coated, and urethane-coated.

Tenon^® FormGuard Citrus

Tenon® FormGuard Citrus is a V.O.C. compliant, ready-to-use, petroleum based, chemically reactive liquid concrete form release agent. Tenon® FormGuard Citrus effectively prevents bonding of concrete to forms and form liners. Use of Tenon® FormGuard Citrus regularly will increase the life of all forms. Tenon® FormGuard Citrus can be used on forms such as steel, aluminum, fiberglass-reinforced, all grades of plywood, epoxy-coated, and urethane-coated.

Tenon^® Shotcrete D-LR Microfiber

Tenon® D-LR1 Microfiber is a dry-process shotcrete containing a pre-blended Portland cement, air-entraining admixture, set time accelerator, synthetic fibers, selectively blended aggregates, and propriety performance enhancing components. Available in 80 lb. bags (BOM #112865) and 3000 lb. bags (BOM #110258). Tenon® D-LR2 Microfiber is specifically designed to provide low resistivity values complimenting preplaced cathodic protection systems. Available in 80 lb. bags (BOM #112866) and 3000 lb. bags (BOM #112864).

Tenon^® Shotcrete D-SF Microfiber

Tenon® D-SF Microfiber is a dry process shotcrete containing a pre-blended Portland cement, silica fume, air-entraining admixture, set time accelerator, synthetic fibers, selectively blended aggregates, and propriety performance enhancing components. Tenon® D-SF Microfiber is specifically designed to provide excellent application characteristics with balanced performance properties. This product is approved by MNDOT for "Shotcrete - Concrete Surface Repairs". Available in 80 lb. bags (BOM #112870 & BOM #112868) and 3000 lb. bags (BOM #112869 & BOM #112867).

Tenon^® Ultimate Barrier

Tenon® Ultimate Barrier is a clear, non-yellowing, fast drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Tenon® Ultimate Barrier is designed to be a single application for curing, sealing, and weatherproofing. Tenon® Ultimate Barrier forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion, damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases. Tenon® Ultimate Barrier reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion which moisture can cause. It is suitable for use to cure, protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials.

Akona^® Concrete Bonding Additive

Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).

Rapid Patch^® Concrete Repair Mortar

Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).

TCC Materials^® Concrete Curb Mix

TCC Materials® Concrete Curb Mix is a dry, preblended, air entrained concrete mix containing cementitious material, aggregate and other special additives formulated for flowability and freeze-thaw resistance. The product is designed for ease of installation using a concrete curb machine. Available in two designs: Concrete Curb Mix-CS (BOM #104202): Coarse Sand, HRWR, AIR Concrete Curb Mix-CS/PR (BOM #104203.1): Coarse Sand, ⅜" Pea Rock, HRWR, AIR

Akona^® Concrete/Masonry Restoration Cleaner

Akona® Concrete/Masonry Restoration Cleaner (BOM #102652) is a mild, acidic product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry. This enables the sealer to penetrate and seal more effectively. Use this product before applying Akona Penetrating Paver & Masonry Sealer or Akona Water Based Concrete Sealer. In addition, Akona Surface Concrete Cleaner may be used to prepare the surface of concrete or masonry prior to using Akona Repair Products.

NorthRock^® Multi-Purpose Gravel

NorthRock® Multi-Purpose Gravel (BOM #104103) can be used as a decorative landscape rock for gardens, pathways, ponds, borders or for a variety of uses around the house, such as drainage, trench bedding or backfilling applications. Bag Size: ½ Cubic Foot  **NorthRock aggregates are a naturally mined product. Color consistency may vary slightly from different veins within the quarry.**

Quikrete^® All-Purpose Sand

Quikrete® All-Purpose Sand is a washed, properly graded coarse sand with multi-purpose uses. Meets ASTM C 33 specifications. Available in 50 lb. bags plain (BOM #108620) or dried (BOM #105755).

Rapid Patch^® Multi-Purpose Repair

Rapid Patch® Multi-Purpose Repair (20 lb. BOM #129440, 50 lb. BOM #129450) is a fast-setting, high-performance, multi-use blend of hydraulic cement, fine aggregates, and special additives used for concrete repair and new construction, including casting, anchoring, grouting, and wet environments. Adheres to concrete, stone, masonry, and stucco. Mix with water for applications from feather-edge to 4 in. (10 cm).

TechMix^® Black Blast

TechMix® Black Blast (BOM #106908) are abrasive blasting crystals that can be used for rust/paint removal and cleaning stone and brick. Additionally, the crystals hard, sharp, evenly-sized crystals make them ideal to frost/etch glass. Black Blast crystals work with all blasting equipment, are safe to use, and have a 1.5-2.0 mil anchor profile.

Tenon^® Air-Entrained Concrete Patching Mix AE

Tenon® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal material for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with Tenon Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.

Tenon^® Air Entrainment

Tenon® Air Entrainment (BOM #120377) is a ready-to-use, aqueous solution made of organic materials.  Air Entrainment entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding and improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete.

Tenon^® SuperFlow

Tenon® SuperFlow water-reducing admixture is a full range water reducing additive providing a more plastic and flowable concrete. It produces concrete mixes with different levels of workability to include self-consolidating concrete (SCC) applications. Tenon SuperFlow admixture meets ASTM C494-C 494M compliance requirements for Type A water-reducing and Type F high-range water-reducing admixtures.

Akona^® Concrete Repair

Akona® Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.

SPEC MIX^® Mortar

SPEC MIX® Portland Lime & Sand Mortar is a dry, preblended mortar mix containing Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers Spec Mix® Portland Lime & Sand mortar in Type N (BOM #101212), Type S (BOM #101013), Type M (BOM #101320), and Type O (BOM #107500). PCL Sand is also available with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags Type N (BOM #100316), Type S (BOM #101455), Type M (BOM #101456), and Type O (BOM #109618) to work with our silo system. Please contact your salesperson for more information.

For jobsites with air-quality concerns, consider our LOW-DUST Mortar Option.  For more information, please contact your salesperson for location availability and pricing.

TCC Materials^® Iowa DOT Concrete Patch Mix

TCC Materials® Iowa DOT Concrete Patch Mix (BOM #104912) is a low-slump concrete primarily used for bridge deck overlays and concrete pavements. Produces a high-strength concrete repair material that is extremely durable and works well in harsh environments. Use for both full-depth and partial-depth applications.

Akona^® Crack-Resistant Surface Bonding Cement

Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).

Akona^® Epoxy Crack Repair

Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.

Quikrete^® Re-Cap Concrete Resurfacer

Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.

Akona^® Fast-Setting Anchoring Epoxy

Akona® Fast-Setting Anchoring Epoxy (BOM #120438) is a two-component, high-performance, 100% solids, high-modulus, non-sag gel epoxy designed for anchoring bolts, railings, dowels, and rebar steel into concrete and to bond or repair a variety of household and common building materials including concrete, porous tile, and stone. Special no-mess, self-mixing tube for easier application. Non-shrink, resistant to chemicals and solvents, this high-strength, fast-setting epoxy has a gel time in as little as 12-14 minutes; initial cure of 2 hours; and final cure time of 12-16 hours. Use both horizontal and vertical, up to 1/8" (3 mm) annular width and 10" (254 mm) depth. Because it is moisture tolerant, it is ideal for stopping air and water leaks. Gray in color.

SPEC MIX^® Mortar – White

SPEC MIX® Portland Lime & Sand White Mortar is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried masonry sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar in Type N (BOM #106425), Type S (BOM #105707), and Type O (BOM #108645). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

Akona^® Foundation Coating Cement

Akona® Foundation Coating Cement (BOM #102621) is a specially-formulated, cement-based product for coating and protecting polystyrene insulation board or insulated concrete forms (ICF) from weathering, ultraviolet rays, and general wear/impact. Akona Foundation Coating Cement is polymer-modified and contains fibers which reduces shrinkage and improves the adhesion properties of the product. Akona Foundation Coating Cement is easy to apply by masonry brush or trowel and has the superior durability of a Portland cement-based product. It also provides a tough, durable gray textured or stucco-like finish. If desired, the product may be integrally colored with a liquid cement or mortar colorant, or it can be painted to match existing home design.

Quikrete^® Expansion Strips

Quikrete® Expansion Joint Strips (BOM #106868) are made from resilient wood fibers to prevent damage during expansion and contraction of concrete. These ½"x 4"x 60" weather-resistant strips are used between concrete slabs in driveways, sidewalks, and patios as well as to separate concrete from the structures they butt up to. Meets requirement of ASTM D 1751.

Sakrete^® Concrete Bonder & Fortifier

Sakrete® Concrete Bonder & Fortifier (BOM #120036) is a high-solids acrylic liquid bonding agent, used as a bonding admix or bonding agent enhance strength, durability, adhesion, abrasion resistance, and freeze-thaw resistance of concrete.

Tenon^® Concrete & Masonry Dissolver

Tenon® Concrete & Masonry Dissolver is an environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to safely dissolve and remove cured concrete, mortar, grout, and stucco build-up from tools, concrete forms, job mixers, hardware, shoring, and more.

Akona^® Heavy-Duty Waterproofing Base Coat

Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).

Sakrete^® Concrete Crack Filler

Sakrete® Concrete Crack Filler (BOM #120026) is a flowable, polymer-based crack filler for concrete. This repair material is designed to fill and seal cracks in concrete up to 1/4 in. wide and 1/4 in. deep.

SPEC MIX^® Mortar (w/ Silica Sand) – White

SPEC MIX® Portland Lime & Sand White Mortar w/ Silica Sand is a dry preblended mortar mix containing white Portland cement, hydrated lime and dried silica sand formulated for superior bond, water retention and board life. Because it is made with white Portland, this product is ideal for adding color or ordering with integral color. This product meets ASTM C 270 and ASTM C 1714 requirements. TCC Materials offers SPEC MIX® Portland Lime & Sand mortar in Type N (BOM #107615), Type S (BOM #107134), and Type O (BOM #109740). PCL Sand is also available as a white/gray Portland mix and/or with an Integral Water Repellant (IWR). Also available in 3,000 lb. (BOM #107138) bulk bags Type N (BOM #106413), and Type S (BOM #105376) to work with our silo system. Please contact your salesperson for more information.

Tenon^® Concrete Patching Mix

Tenon® Concrete Patching Mix (BOM #126198) is a dry mixed combination of Portland-limestone Cement and aggregates that is proportioned and manufactured according to MnDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete.

Akona^® Instant Anchoring Cement

Akona® Instant Anchoring Cement (BOM #102645) is a quick-setting, anchoring cement compound used for setting poles, railings, bolts and fixtures in concrete or masonry. Suitable for interior or exterior use, this product expands as it hardens to set securely and lock in place for strong support. Average set time = 20 minutes

Quikrete^® FastSet^™ Repair Mortar

Quikrete® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours = 4,000 psi, 7 days = 5,000 psi, and 28 days = 6,000 psi.

Tenon^® Concrete Resurfacer

Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.

Akona^® Instant Patching Cement

Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.

SAKRETE^® Concrete Mortar Dissolver

Sakrete® Concrete Mortar Dissolver is a safe, environmentally-friendly liquid alternative to aggressive acid concrete removers. Use to remove cured cement, concrete, mortar or stucco from most surfaces. Available in 28 oz. bottle (BOM#120043), 1 gal. bottle (BOM#121120), and 5 gal. pail (BOM#121130).

Sakrete^® Concrete & Mortar Repair

Sakrete® Concrete & Mortar Repair Tube (BOM#121098) is a weather-resistant, latex-based polymer used for repairing deteriorated mortar joints or cracks in concrete.

Akona^® Instant Water Stop

Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)

SAKRETE^® Concrete Repair

Sakrete® Concrete Repair Tube (BOM#121099) is a weather-resistant, latex-based polymer used for filling cracks in concrete. 

TechMix^® Masonry Cement

Tech Mix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.

Akona^® Liquid Air Entraining Admixture

Akona® Liquid Air Entraining Admixture (BOM #103941) is a ready-to-use, aqueous solution made of organic materials. Akona Liquid Air Entraining Admixture entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding and improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete.

Akona^® Mortar Repair

Akona® Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, latex-based polymer formulation that dries quickly, is paintable, and provides superior adhesion to masonry.

Quikrete^® Mortar Mix – Type N

Quikrete® Mortar Mix (BOM #100533) is a blend of masonry cement and graded sand, designed to meet ASTM C 270 for Type N Mortar. Just add water and mix to construct or repair block, brick, or stone structures like walls, pillars, barbecues, planters, and for tuck-pointing mortar joints.

SPEC MIX^® Shotcrete

SPEC MIX® Shotcrete products are designed for a wide range of applications. Shotcrete products are available in standard formulizations and custom mix designs to fit specific project requirements -- whether you are casting new structures or restoring existing projects, above ground or below. Please contact your sales representative for more information. Also available in 3,000 lb. bulk bags to work with our silo system. Please contact your salesperson for more information.

Sakrete^® Fast Setting Cement Patcher

Sakrete® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).

Tenon^® Fast-Set Liquid Activator

Tenon® Fast-Set Liquid Activator is formulated specifically to be used in conjunction with Tenon® Air-Entrained Concrete Patching Mix AE in order to establish a quicker set and develop strength rapidly. When used with the patching mix, Fast-Set Liquid Activator reduces the closure time of high-traffic areas from 24 hours to 4-5 hours under normal conditions. Available in 1 gallon bottles (BOM #120593) and 5 gallon pails (BOM # 120770).

Akona^® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).

Quikrete^® Polyurethane Construction Adhesive

Quikrete® Polyurethane Construction Adhesive (BOM #102353) is a high-performance, construction-grade adhesive designed for permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Ideal for bonding retaining wall block and caps, repairing broken concrete, or adhering signage and other items to concrete.

SPEC MIX^® Stone Veneer Mortar – Joint Grout

SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color. Also available in 3,000 lb. (BOM #102310) bulk bags to work with our silo system. Please contact your salesperson for more information.

Akona^® Gray Pourable Concrete Crack Filler

Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.

Quikrete^® Polyurethane Non-Sag Sealant

Quikrete® Polyurethane Non-Sag Sealant (BOM #102351) is a high-performance, construction-grade polyurethane sealant designed for vertical and overhead surfaces. The non-sag formula provides superior adhesion and flexibility and is ideal for filling and sealing cracks and expansion joints in concrete, stucco, or masonry or for sealing around window and door openings. Meets ASTM C 920, Type S, Grade NS.

Sakrete^® Fast Setting Repair Mortar

Sakrete® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a featheredge to 2" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.

Quikrete^® Polyurethane Self-Leveling Sealant

Quikrete® Polyurethane Self-Leveling Sealant (BOM #102352) is a high-performance, construction-grade, polyurethane sealant used for sealing cracks and joints in horizontal concrete surfaces. This self-leveling formula provides superior adhesion, flexibility and durability and is ideal for sealing expansion joints and crack in concrete floors, driveways, patios, steps, basements, and pool decks. Meets ASTM C 920 Type S, Grade P, Class 25.

Sakrete^® Fast Setting Self-Leveling Resurfacer

Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations. 

Akona^® Medium-Duty Refractory Mortar

Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.

Sakrete^® Flo-Coat Concrete Resurfacer

Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.

Quikrete^® Sand Mix

Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.

Tenon^® Instant Anchoring Cement

Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected.   Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).  

Akona^® Vinyl Cement Patch

Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).

TechMix^® Sand Topping Mix

TechMix® Sand Topping Mix is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2" thick or less. Used for patching and leveling steps, slabs, walks, and floors. Available in 60 lb. bags (BOM #104880).

Tenon^® Instant Hydraulic Cement

Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners.  Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails. 

Sakrete^® High Strength Anchoring Epoxy

Sakrete® High Strength Anchoring Epoxy (BOM #129427) is a two-component epoxy compound that cures to an exceptionally strong, hard product. This unique formulation provides an excellent balance of mixability and flow without run-out to allow for the fastening and anchoring of both vertical and horizontal fixtures into masonry.

Akonaflex^® Pro Self-Leveling Expansion Joint Filler

Akonaflex Pro Expansion Joint Filler is a superior-grade, one-component, MS polymer sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its semi-self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, patios, steps, garage floors, above ground foundations, and other concrete surfaces. Fills expansion joints up to 2.5 in. wide x 1.5 in. deep, and contains a unique, specially-formulated technology which allows it to be exposed to water after only 2 hours without washing out. Reaches full cure after 24 hours. Won’t crack or shrink and acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).

Akonaflex^® Self-Leveling Concrete Repair

Akonaflex® Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1½"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).

Quikrete^® Surface Bonding Cement

Quikrete® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with Quikrete® Stucco & Mortar Color.

Sakrete^® Leak Stopper Hydraulic Cement

Sakrete® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.

Akonakote^® Pourable Concrete Patch

Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.

Akonaseal^® Non-Sag Masonry/Joint Sealant

Akonaseal® Masonry/Joint Sealant (BOM #104561) is a premium-grade, multipurpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1½"W x ¾"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.

Quikrete^® Vinyl Concrete Patcher

Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).

SAKRETE^® Mortar Repair

Sakrete® Mortar Repair Tube (BOM#121119) is a weather-resistant, latex-based polymer used for repairing deteriorated mortar joints or cracks in walls.

Tenon^® Metro Mix^™

Tenon® Metro Mix™ (BOM #128260) is a high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 2" (51 mm) or greater. Exceeds ASTM C 387.

SAKRETE^® Polyurethane Construction Adhesive

Sakrete® Polyurethane Construction Adhesive (BOM#121096) is a strong adhesive that bonds various materials together or fill cracks in concrete. 

SAKRETE^® Polyurethane Non-Sag Sealant

Sakrete® Polyurethane Non-Sag Sealant (BOM#121095) is a one-component sealant that forms a flexible joint with excellent adhesion for horizontal or vertical applications. 

Tenon^® Mighty Bond^™

Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).

SAKRETE^® Polyurethane Self-Leveling Sealant

Sakrete® Polyurethane Self-Leveling Sealant (BOM#121097) is a one-component, self-leveling sealant for filling cracks or joints in horizontal applications.

TechPro^® Moisture Barrier

TechPro® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of TechPro Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, TechPro Moisture Barrier is part of the TechPro veneer stone installation system. Color will be light orange when applied, dries to dark orange.

Tenon^® Partial Depth Concrete Patch

Tenon® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724) (fine sand aggregate to Portland cement ratio).

Sakrete^® Pourable Concrete Patch

Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.

Sakrete^® Pro-X180 Rapid Strength Concrete Mix

Sakrete® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.

Sakrete^® Rapid Setting Anchoring Epoxy

Sakrete® Rapid Setting Anchoring Epoxy (BOM #129428) is a two-component epoxy compound used to anchor bolts or other metal objects in concrete and masonry. A rapid setting material that can be used in vertical or horizontal applications. Its rapid set allows for use in walls with minimal run-out.

Sakrete^® Sand Mix

Sakrete® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.

Sakrete^® Top ‘n Bond Concrete Patcher

Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.

Tenon^® Pourable Concrete Patch

Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.

Tenon^® Rapid Patch^® 100

Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, can be extended for repairs greater than 2" deep. 

Tenon^® Rapid Patch^® 200

Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep, or can be extended for repairs greater than 2" deep. Wide temperature range for application.

Tenon^® Masonry Veneer Joint Grout

Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).

Tenon^® Commercial DOT Repair

Tenon® Commercial DOT Repair is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Resistant to salts, grease, oil, and other chemicals often found in the transportation environment. Commercial DOT Repair is approved by MNDOT for "Rapid Hardening Materials for Repairs" and WYDOT for "Bridge Concrete Repair". Available in 50 lb. bags "Neat" (BOM # 100689), and "Extended" (BOM #110735).

Tenon^® Vertical Repair CI

Tenon® Vertical Repair CI (BOM# 113810) is a polymer modified, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes.

Note: Also available without corrosion inhibitor (BOM# 126171).

Tenon^® Refractory Mortar

Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours. 

Tenon^® Rub-Pro^™

Tenon® Rub-Pro is a one-component, polymer-modified, Portland cement-based, interior and exterior resurfacer designed for smoothing and filling vertical and overhead concrete and masonry surfaces. Available in #3 light gray bag (BOM #128180) and light gray pail (BOM# 121153).

Tenon^® 100% Silane Sealer

Tenon® 100% Silane Sealer is a clear, solvent-based, concrete sealer that penetrates deep into, and reacts chemically, within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and  rebar corrosion which moisture can cause. It is suitable for use to protect and seal fully-cured fresh concrete, cast in place, precast, and high strength concrete materials. 100% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. It is excellent for treating high traffic areas or surfaces that receive high salt concentrations such as coastal piers.  Available in 1 gal. bottle (BOM #129890), 5 gal. pail (BOM #129900) and 55 gal. drum (BOM #129652). 

TechPro^® Stone Veneer Joint Grout

TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).

Tenon^® Surface Bonding Cement CR

Tenon® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #113951) and White (BOM #113952).

Tenon^® Vertical Concrete Surface Finisher

Tenon® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM #120765) or white (BOM #120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to be mixed with Tenon Mighty Bond liquid additive. Vertical Concrete Surface Finisher when mixed with Mighty Bond is approved by MNDOT under Special Surface Finish System.

Tenon^® Vinyl Concrete Patch

Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag  (BOM #120681). 

Tenon^® Waterproofing & Crack Isolation Membrane

Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).