Concrete Repair

Akona^® Power Patch Pro

Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)

Quikrete^® FastSet^™ All-Crete^™

FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).

Quikrete^® FastSet^™ Repair Mortar

FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]

Quikrete^® FastSet^™ Self-Leveling Floor Resurfacer

High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service

Quikrete^® FastSet^™ Water-Stop Cement

High Performance Cement FastSet™ Water-Stop Cement (BOM #113205) is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. FastSet™ Water-Stop Cement will block running water when application is made to masonry or concrete surfaces. This special formulation allows the product to obtain high strength and rapid setting while repelling water. FastSet™ Water-Stop Cement solves leakage problems wherever active water is present, in all masonry and concrete above and below grade. Use FastSet™ Water-Stop Cement for sealing around concrete pipes and for plugging leaks in: • Foundation and retaining walls • Chimneys • Swimming pools, fountains and cisterns

Rapid Patch^® Concrete Crack & Patch

Rapid Patch Concrete Crack & Patch is a heavy duty, fast-setting patching material for concrete block, sidewalks, patios, steps, and other concrete or masonry surfaces. This product is suitable for interior or exterior applications and may be trowel applied over existing concrete surfaces from a feather edge to a one half inch thickness to refinish the concrete surface.

Rapid Patch^® Hairline Crack Repair

Rapid Patch Hairline Crack Repair is a two-component, low-viscosity, 100% solids, urethane repair product designed for filling cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Product goes on black and dries gray. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).

Rapid Patch^® Moldable Concrete Repair

Rapid Patch® Moldable Concrete Repair is a fast setting, general purpose cement-based patching material for repairing concrete and masonry. Moldable Concrete Repair is a proprietary blend of Portland cements, aggregate and additives that achieve an initial set in 10-15 minutes; final set in 20-25 minutes. It can be shaved down for a more uniform looking repair after the initial set. Primary applications include drive-ways, walkways, stairs, patios, pool decks, basement floors and garage floors.

Rapid Patch^® Rapid Loc^™ Concrete & Veneer Bond

Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).

Sakrete^® Pro-Mix All-Purpose Cement Mix

Pro-Mix™ All-Purpose Cement Mix is a fast setting, high performance concrete repair material that is shrinkage compensating, and high strength. Just add water to produce an easy to use mix ideal for repairs where short down times are critical and high durability and rapid strength are needed. Available in 20 lb. pails (BOM #113014) and 50 lb. bags (BOM #112704).

Tenon^® Critical Pavement Repair (CPR)

Tenon® Critical Pavement Repair (CPR) is a preblended, single-component, repair mortar designed to be a quick, durable repair for essential heavy-duty surfaces. This includes airport runways, concrete highways, parking structures, freezer rooms, loading docks, industrial floors, and much more. It is fast-setting, high-strength, polymer-modified, and fiber reinforced as well as freeze-thaw durable. CPR contains corrosion inhibitors to mitigate corrosion issues. It can be trowel applied on horizontal or vertical surfaces or pumped into place for formed vertical and overhead repairs. Meets ASTM C928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs. Available in a 50 lb. bag (BOM #113091).

Rapid Patch^® Concrete Repair Mortar

Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).

TCC Materials^® Concrete Curb Mix

TCC Materials® Concrete Curb Mix is a dry, preblended, air entrained concrete mix containing cementitious material, aggregate and other special additives formulated for flowability and freeze-thaw resistance. The product is designed for ease of installation using a concrete curb machine. Available in two designs: Concrete Curb Mix-CS (BOM #104202): Coarse Sand, HRWR, AIR Concrete Curb Mix-CS/PR (BOM #104203.1): Coarse Sand, ⅜" Pea Rock, HRWR, AIR

Rapid Patch^® Multi-Purpose Repair

Rapid Patch® Multi-Purpose Repair (20 lb. BOM #129440, 50 lb. BOM #129450) is a fast-setting, high-performance, multi-use blend of hydraulic cement, fine aggregates, and special additives used for concrete repair and new construction, including casting, anchoring, grouting, and wet environments. Adheres to concrete, stone, masonry, and stucco. Mix with water for applications from feather-edge to 4 in. (10 cm).

Tenon^® Air-Entrained Concrete Patching Mix AE

Tenon® Air-Entrained Concrete Patching Mix AE (3U58M) (BOM #126199) is an ideal material for repairing concrete pavement, bridge decks, industrial floors, concrete parking lots, and garage decks. This pre-blended mixture of cement, aggregate, and special additives will produce a high strength concrete repair material that is extremely durable and works well in harsh environments. Additionally, when used with Tenon Fast-Set Liquid Activator, surfaces can be reopened to traffic within 4 to 5 hours under typical conditions.

Akona^® Concrete Repair

Akona® Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.

TCC Materials^® Iowa DOT Concrete Patch Mix

TCC Materials® Iowa DOT Concrete Patch Mix (BOM #104912) is a low-slump concrete primarily used for bridge deck overlays and concrete pavements. Produces a high-strength concrete repair material that is extremely durable and works well in harsh environments. Use for both full-depth and partial-depth applications.

Akona^® Crack-Resistant Surface Bonding Cement

Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).

Akona^® Epoxy Crack Repair

Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.

Quikrete^® Re-Cap Concrete Resurfacer

Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.

Sakrete^® Concrete Crack Filler

Sakrete® Concrete Crack Filler (BOM #120026) is a flowable, polymer-based crack filler for concrete. This repair material is designed to fill and seal cracks in concrete up to 1/4 in. wide and 1/4 in. deep.

Tenon^® Concrete Patching Mix

Tenon® Concrete Patching Mix (BOM #126198) is a dry mixed combination of Portland-limestone Cement and aggregates that is proportioned and manufactured according to MnDOT specification 3105 for grade 3U18. When mixed according to specifications with water and admixtures, it is an ideal mixture for repairing concrete pavement, industrial floors, and structural concrete.

Quikrete^® FastSet^™ Repair Mortar

Quikrete® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours = 4,000 psi, 7 days = 5,000 psi, and 28 days = 6,000 psi.

Tenon^® Concrete Resurfacer

Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.

Akona^® Instant Patching Cement

Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.

Akona^® Instant Water Stop

Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)

Sakrete^® Fast Setting Cement Patcher

Sakrete® Fast Setting Cement Patcher is used for horizontal, vertical, and overhead repairs where an accelerated set-time is needed. Use for applications of ½ inch featheredge. Fast Setting Cement Patcher is available in a 50 lb. pail (BOM #120029), and a 10 lb. box (BOM #120028).

Akona^® Polymer-Modified Concrete Resurfacer

Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).

Sakrete^® Fast Setting Repair Mortar

Sakrete® Fast Setting Repair Mortar (BOM #120371) is a fast-setting, high-strength patching material for both interior and exterior concrete surfaces. The convenient zip-pouch package is designed with the do-it-yourselfer in mind for smaller repair projects. Just add water and mix in the bag to create a workable mixture with excellent bonding characteristics. Trowel apply over existing concrete surfaces from a featheredge to 2" thickness to fix minor blemishes. Use for vertical, horizontal, and overhead repairs to pavement, curbs, steps, and more. Sakrete Repair Mortar can be shaved and sanded to shape. Sets up in 10-12 minutes.

Sakrete^® Fast Setting Self-Leveling Resurfacer

Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations. 

Sakrete^® Flo-Coat Concrete Resurfacer

Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.

Quikrete^® Sand Mix

Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.

Tenon^® Instant Anchoring Cement

Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected.   Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).  

Akona^® Vinyl Cement Patch

Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).

TechMix^® Sand Topping Mix

TechMix® Sand Topping Mix is a uniformly pre-blended Portland cement and sand mixture for placing concrete overlays 2" thick or less. Used for patching and leveling steps, slabs, walks, and floors. Available in 60 lb. bags (BOM #104880).

Tenon^® Instant Hydraulic Cement

Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners.  Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails. 

Akonaflex^® Self-Leveling Concrete Repair

Akonaflex® Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1½"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).

Quikrete^® Surface Bonding Cement

Quikrete® Quikwall Surface Bonding Cement is an alkali-resistant, fiberglass-reinforced, Portland cement based, surface bonding cement used for construction of dry-stack (without mortar) cement block walls. Available in Gray (BOM #101359) and White (BOM #100246). Add color with Quikrete® Stucco & Mortar Color.

Akonakote^® Pourable Concrete Patch

Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.

Quikrete^® Vinyl Concrete Patcher

Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).

Tenon^® Metro Mix^™

Tenon® Metro Mix™ (BOM #128260) is a high performance concrete mix engineered to meet commercial/industrial ready mix specifications. Super plasticized for higher slump and compressive strengths with corrosion inhibitors. Ideal for projects requiring small structural concrete applications or when ready mix truck access is restricted. Use for structural applications and full depth repairs of 2" (51 mm) or greater. Exceeds ASTM C 387.

Tenon^® Partial Depth Concrete Patch

Tenon® Partial Depth Concrete Patch is is ideal for placing overlays less than 2” deep (5 cm). This pre-blended cement and oven dried sand mixture will produce a high-strength concrete repair material that is extremely durable in partial depth applications such as concrete pavements, bridge decks, industrial floors, concrete parking lots and garage decks. It is also used for adhering pavers to concrete steps and walks, patching and/or leveling concrete surfaces, filling large cracks, and filling cores in masonry block or brick. Available in 2:1 mix (BOM #120722), 2.5:1 mix (BOM #120723), or 3:1 mix (BOM #120724) (fine sand aggregate to Portland cement ratio).

Sakrete^® Pourable Concrete Patch

Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.

Sakrete^® Pro-X180 Rapid Strength Concrete Mix

Sakrete® Pro-X180 Concrete Mix (BOM #110764) is a commercial grade blend of fast-setting cement, sand, gravel, and other proprientary performance additives designed to provide extended working time and high early strength for concrete applications requiring a mininum thickness of 1-1/2". Air-entrained for improved workability and freeze-thaw resistance, this mix is performance enhanced with corrosion inhibitors and contains fibers for crack-resistance and increased toughness.

Sakrete^® Sand Mix

Sakrete® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.

Sakrete^® Top ‘n Bond Concrete Patcher

Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.

Tenon^® Pourable Concrete Patch

Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.

Tenon^® Rapid Patch^® 100

Tenon® Rapid Patch® 100 (BOM #120970) is a fast-setting, fiber-reinforced, high strength, cement-based repair mortar designed for applications where high early strength gain is needed to reduce down time. Apply neat from 1/2" to 2" deep, can be extended for repairs greater than 2" deep. 

Tenon^® Rapid Patch^® 200

Tenon® Rapid Patch® 200 (BOM #120971) is a rapid-setting, fiber reinforced, high strength, polymer-modified cement mortar designed for concrete repair and overlay applications requiring high durability. Apply neat from 1/2" to 2" deep, or can be extended for repairs greater than 2" deep. Wide temperature range for application.

Tenon^® Commercial DOT Repair

Tenon® Commercial DOT Repair is a rapid-setting, high-strength, polymer-modified, one-component hydraulic cement mortar designed for concrete repair and overlay applications requiring high durability. Meets or exceeds ASTM C928-R3 Standard Specification for Packaged, Dry, Very Rapid, Hardening Cementitious Materials for Concrete Repair. Resistant to salts, grease, oil, and other chemicals often found in the transportation environment. Commercial DOT Repair is approved by MNDOT for "Rapid Hardening Materials for Repairs" and WYDOT for "Bridge Concrete Repair". Available in 50 lb. bags "Neat" (BOM # 100689), and "Extended" (BOM #110735).

Tenon^® Vertical Repair CI

Tenon® Vertical Repair CI (BOM# 113810) is a polymer modified, high-strength, fast-setting, non-shrink, patching material for commercial and industrial vertical and overhead holes in concrete or masonry. Can be shaved or molded to required shapes.

Note: Also available without corrosion inhibitor (BOM# 126171).

Tenon^® Rub-Pro^™

Tenon® Rub-Pro is a one-component, polymer-modified, Portland cement-based, interior and exterior resurfacer designed for smoothing and filling vertical and overhead concrete and masonry surfaces. Available in #3 light gray bag (BOM #128180) and light gray pail (BOM# 121153).

TechPro^® Stone Veneer Joint Grout

TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).

Tenon^® Surface Bonding Cement CR

Tenon® Surface Bonding Cement CR is a versatile fiber-reinforced, Portland cement-based product used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, repair deteriorated stucco, and in the construction of concrete block walls that are dry stacked (without mortar) above the first course. Special fibers control shrinkage, cracking, and sagging on vertical applications and provides additional overall strength when compared with conventional concrete. Available in Gray (BOM #113951) and White (BOM #113952).

Tenon^® Vertical Concrete Surface Finisher

Tenon® Vertical Concrete Surface Finisher is a superior cementitious waterproofing coating for concrete and masonry. It provides a protective and waterproof surface while eliminating the rubbing process. Spray or brush applied, available in light gray (BOM #120765) or white (BOM #120764). For added performance, durability, and improved bonding, Vertical Concrete Surface Finisher is designed to be mixed with Tenon Mighty Bond liquid additive. Vertical Concrete Surface Finisher when mixed with Mighty Bond is approved by MNDOT under Special Surface Finish System.

Tenon^® Vinyl Concrete Patch

Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag  (BOM #120681).