Stone Veneer Mortars
-
Spec Mix® Building Stone Mortar
Spec Mix® Building Stone Mortar is specially designed for masonry building masonry walls with full depth stone units. Whether the specification calls for soft or hard stone, Building Stone mortar mix is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength while allowing the mason to lay more stone […]
-
TCC Materials® Stone Mortar Mix
TCC Materials® Stone Mortar Mix (BOM #109043) is a specially formulated product for use in applying precast masonry veneer, thin natural stone veneer or thin brick units to base surfaces. This versatile product may be used as an initial base coat for your project, then can be used in applying masonry veneer to the substrate. The material is factory blended to ensure bond strength, workability and consistency. To mix, just add water. Follow the stone installation instructions provided by the manufacturer. Available in a 60 lb. (27.2 kg) bag.
-
SPEC MIX® Polymer-Modified Adhered Veneer Mortar (PMAVM)
SPEC MIX® Polymer Modified Adhered Veneer Mortar (PMAVM) (BOM #103592) is a blend of dry cementitious materials, masonry sand and performance admixtures specifically designed to provide superior bond for adhered manufactured and natural thin stone as well as brick veneer units. PMAVM is designed to provide excellent workability, cohesion, high bond strength, sag resistance, water resistance, efflorescence minimization, and durability. This product meets the requirements of ASTM C 270 and ASTM C 1714 for Type S mortars including ANSI A118.4 and ACI 530 shear bond standards. TCC Materials also offers PMAVM with integral color. Also available in 3,000 lb. (BOM #103593) bulk bags to work with our silo system. Please contact your salesperson for more information.
-
SPEC MIX® Adhered Veneer Mortar
SPEC MIX® Adhered Veneer Mortar (AVM) is a blend of dry cementitious materials and masonry sand specifically designed to provide superior bond for precast, lightweight masonry veneer units to base surfaces, and is also offered with integral color. TCC Materials offers Adhered Veneer Mortar in Type N (BOM #109302) and Type S (BOM #109454) This product meets ASTM C270 and ASTM C 1714, and CSA A 179 for Type S mortar including ACI 530 shear strength requirements. Also available in 3,000 lb. bulk bags Type N (BOM #109559) and Type S (BOM #109557) to work with our silo system. Please contact your salesperson for more information.
-
SPEC MIX® Stone Veneer Mortar – Joint Grout
SPEC MIX® Stone Veneer Joint Grout (BOM #108404) is a blend of dry, cementitious materials, and masonry sand specifically designed to fill the joints between various precast, lightweight, masonry veneer systems. TCC Materials also offers SPEC MIX joint grout made with white cement and/or with integral color. Also available in 3,000 lb. (BOM #102310) bulk bags to work with our silo system. Please contact your salesperson for more information.
-
SPEC MIX® Stone Veneer Mortar – Scratch Base
SPEC MIX® Scratch & Base Mortar (BOM #108540) is a blend of dry, cementitious materials and masonry sand specifically designed for superior bond and durability. Use SPEC MIX® Scratch & Base as a base coat for attaching precast, lightweight masonry units over wood and lath, concrete or masonry substrates. TCC Materials also offers SPEC MIX® Scratch & Base with integral color. Also available in 3,000 lb. (BOM #109009) bulk bags to work with our silo system. Please contact your salesperson for more information.
-
TechMix® PCL Mortar Pro – Type N
TechMix® PCL Mortar Pro - Type N is a consistent, specifically-formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type N is suitable for load-bearing, above-grade construction. Meets requirements of ASTM C270. Available in 80# bags (BOM #111207) and 3000# bulk bags (BOM #111118). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.
-
TechMix® PCL Mortar Pro – Type S
TechMix® PCL Mortar Pro - Type S is a consistent, specifically formulated blend of Portland cement, hydrated lime, and dried sand with superior bond, water retention, and board life. Used for multi-purpose interior and exterior masonry construction including laying brick, block, and stone. Type S is suitable for load-bearing construction above or below grade. Meets requirements of ASTM C270. Available in 80# bags (BOM #111217) and 3000# bulk bags (BOM #111119). PCL Mortar Pro is also available with preblended color and/or integral water repellant. For more information, contact your sales representative.
-
Sakrete® Stone Veneer Mortar
Sakrete® Stone Veneer Mortar Mix (BOM #105167) is a polymer-modified contractor grade mortar specifically designed to adhere manufactured or artificial stones in vertical applications. Just add water and mix to use.
-
Tenon® Masonry Veneer Joint Grout
Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).
-
Tenon® Masonry Veneer Mortar PM
Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures, our Pro Veneer Technology (PVT) creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting, yet is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C 1714, ASTM C270, ANSI 118.4, and ACI 530 Shear Bond Standards.
-
Tenon® Masonry Veneer Mortar HB
Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Our Pro Veneer Technology (PVT) is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4, A118.11, A118.15 and ASTM C270.
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).