Non-Shrink Grouts

Tenon^® Rapid Strength Construction Grout LT

Tenon® Rapid Strength Construction Grout LT is a uniquely formulated non-corrosive, cementitious, flowable construction grout. It is designed for extreme duty applications where early strength, fast setting strengths at low temperatures are required.

Tenon^® Ultra High Strength Precision Grout

Tenon®Ultra High Strength Precision Grout is a uniquely formulated cementitious, flowable precision grout.  It is designed for extreme duty applications where high early strength and extremely high finish strengths are required. Available in 50 lb. bag (BOM #114200).

Quikrete^® Fast Set^™ Non-Shrink Grout

Quikrete® FastSet Non-Shrink Grout (BOM #109718) is designed for structural concrete repairs from ¼" to 24" deep and features a 30-minute set time, non-shrink characteristics and rapid strength gain. It can be mixed to a plastic, flowable or fluid consistency. Use for anchoring and grouting anchor bolts, bearing plates, pre-cast concrete keyways, or steel column bases. At a fluid consistency the compressive strength ASTM C109 reaches 2000 psi at 3 hours, 4000 psi at 24 hours, 5000 psi at 7 days, and 6500 psi at 28 days. At a flowable consistency the compressive strength ASTM C109 reaches 2500 psi at 3 hours, 4500 psi at 24 hours, 5500 psi at 7 days and 7500 at 28 days. At a plastic consistency the compressive strength reaches 3000 psi at 3 hours, 5000 psi at 24 hours, 6000 psi at 7 days and 8000 at 28 days. Exceeds ASTM C 928 R-3 and ASTM C 1107.

SPEC MIX^® Self-Consolidating Grout

SPEC MIX® Self-Consolidating Grout (SCG) (BOM #102863) is a dry, preblended grout specifically designed to be highly fluid without segregation of the constituents. SPEC MIX® SCG is used to bond together adjacent masonry units, fill bond beams and occupy all areas around steel reinforcement in the cores of the masonry assemblage without mechanical consolidation or reconsolidation. Meets ASTM C 476 requirements for reinforced masonry construction. TCC Materials also offers SPEC MIX Self-Consolidating Grout as a fine mix (BOM #104381). Also available in 3,000 lb. (BOM #103864) bulk bags to work with our silo system. Please contact your salesperson for more information.

Tenon^® Construction Grout

Tenon® Construction Grout is a non-shrink, non-metallic, Portland-limestone cement-based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107. Available in 50 lb. bags (BOM #120720) and 3000 lb. bags (BOM #113219).

Akona^® Non-Shrink Grout (6,700 PSI)

Akona® Non-Shrink Grout (BOM #104953) is a pre-blended, pourable, non-metallic, Portland-cement based material used for grouting steel columns, bearing plates, precast concrete and anchors. Our Non-Shrink Grout compensates for an uneven foundation, distributes the weight of the unit, and prevents shifting after settling and leveling the unit. Akona Non-Shrink Grout is composed of aggregates, Portland cement and other additives to create an interior or exterior grout with non-shrinking characteristics capable of handling high-load transfers. Meets ASTM C1107 and is MN, WI, and NE DOT approved.

Quikrete^® Precision Non-Shrink Grout

Quikrete® Non-Shrink Precision Grout (BOM #100713) is a high-strength, non-metallic grout designed for precision grouting and general construction applications. Simply add water and mix to obtain flowable properties and high strengths. Its non-shrink characteristics make it stable and capable of handling high load transfers. This grout can be mixed to a plastic, flowable or fluid consistency to for grouting pre-cast concrete, heavy equipment, bearing plates, steel columns, and anchoring applications. At 28 days the compressive strengths reach 14,000 psi at a plastic consistency, 12,000 psi at a flowable consistency, and 8000 psi at a fluid consistency. Complies with ASTM C1107 and Army Corp of Engineers CRD 621.

Tenon^® High Strength Precision Grout

Tenon® High Strength Precision Grout (BOM #120707) is a ready-to-use, high-strength, flowable precision grout mix with excellent working time and early strength ensuring quick job startups and reducing cost. This specially-formulated mix can be pumped into areas inaccessible by conventional grouting methods. High Strength Precision Grout is a non-shrink, non-metallic, non-staining, non-porous, high-density, pumpable formula designed for precision grouting applications and can be extended with the proper aggregates up to 50%.

• Highly-fluid grout with excellent working time and early strength
• Non-shrink, non-corrosive, non-staining, non-porous, and non-metallic
• Applicable Standards: ASTM C-1107 and CRD-C 621

Sakrete^® Non-Shrink Construction Grout

Sakrete® Non-Shrink Construction Grout (BOM #120024) is a non-shrink, non-metallic, Portland cement based material with special additives designed with high flexural and compressive strength to handle high-load transfers. Used for grouting of machinery bases, bearing plates, pre-cast concrete, columns, beams and other anchoring applications.

Sakrete^® Non-Shrink General Purpose Grout

Sakrete® Non-Shrink General Purpose Grout (BOM #120025) is a commercial grade non-metallic Portland cement based structural hydraulic cement for high-strength grouting.

TechPro^® Stone Veneer Joint Grout

TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls.  Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).