Underlayments
-
Quikrete® FastSet™ Self-Leveling Floor Resurfacer
High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service
-
Rapid Patch® Self-Leveling Resurfacer
Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.
-
Tenon® Tile Crete® Floor Mud PM
Tenon® Tile Crete® PM Floor Mud Underlayment Mix is a blend of cementitious material, oven-dried sand and special polymers designed to produce a highly bondable substrate and to optimize consistency between batches. Integral polymer eliminates the need for adding a liquid polymer during mixing when polymer is desired for freeze-thaw durability and enhanced bond. Use as a setting bed/underlayment for ceramic, mosaic, stone, quarry, and paver tile over concrete or wood substrates including countertops. Ideal for forming shower pans and curbs as well as installations requiring a slope to drain. Interior Applications: Tile Crete® PM Floor Mud Underlayment Mix (BOM #110473), Fast-Set Tile Crete® PM Floor Mud (BOM #112521) Exterior Applications: Tile Crete® PM Exterior Floor Mud Underlayment Mix (BOM #112323)
-
Akona® Polymer-Modified Concrete Resurfacer
Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Sakrete® Fast Setting Self-Leveling Resurfacer
Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations.
-
TechPro® Heavy-Duty Stone Veneer Mortar
TechPro® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. TechPro Heavy-Duty Stone Veneer Mortar is "Step 2" of the TechPro stone installation system used to create decorative exterior and non-load bearing interior veneer walls.
-
Akona® Self-Leveling Floor Underlayment Cement
Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.
-
Tenon® Level-Flo® 100
Tenon® Level-Flo® 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-2" (3-51 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Tenon® Level-Flo® 200
Tenon® Level-Flo® 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floor coverings in 16-24 hours. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Tenon® Level-Flo® 300
Tenon® Level-Flo® 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications.
-
Akonakote® Pourable Concrete Patch
Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
-
Tenon® Mighty Bond™
Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).
-
Sakrete® Pourable Concrete Patch
Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.
-
Sakrete® Self-Leveling Underlayment
Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.
-
TechPro® Polymer-Modified Stone Veneer Base Coat
TechPro® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Can be applied over TechPro Moisture Barrier or directly to fully cured concrete.
-
Tenon® Self-Leveling Resurfacer
Tenon® Self-Leveling Resurfacer (BOM #121017) is a polymer-modified, cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 1 in. (25 mm) thick.
-
Tenon® Tile Crete® Floor Mud
Tenon® Tile Crete® Floor Mud Underlayment Mix is a blend of cementitious material and oven-dried sand designed to produce a highly-bondable substrate and to optimize consistency between batches. Use as a setting bed/underlayment for ceramic, mosaic, stone, quarry, and paver tile over concrete or wood substrates including countertops. Ideal for forming shower pans and curbs as well as installations requiring a slope to drain.
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).