Floor Preparation
-
Quikrete® FastSet™ Self-Leveling Floor Resurfacer
High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service
-
Rapid Patch® Feather Edge Pro
Rapid Patch® Feather Edge Pro (BOM #129490) is a trowelable, rapid-setting, Portland cement-based, polymer-modified, patch and skim coating compound for use on multiple substrates. This specially formulated, non-sanded product results in an ultra-smooth finish and can be applied from feather edge to ½ in. (13 mm) and is ideal for use as an embossing leveler.
-
Rapid Patch® Self-Leveling Resurfacer
Rapid Patch Self-Leveling Resurfacer (BOM #103145) is a cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 2 in. (50 mm) thick.
-
Tenon® Tile Crete® Floor Mud PM
Tenon® Tile Crete® PM Floor Mud Underlayment Mix is a blend of cementitious material, oven-dried sand and special polymers designed to produce a highly bondable substrate and to optimize consistency between batches. Integral polymer eliminates the need for adding a liquid polymer during mixing when polymer is desired for freeze-thaw durability and enhanced bond. Use as a setting bed/underlayment for ceramic, mosaic, stone, quarry, and paver tile over concrete or wood substrates including countertops. Ideal for forming shower pans and curbs as well as installations requiring a slope to drain. Interior Applications: Tile Crete® PM Floor Mud Underlayment Mix (BOM #110473), Fast-Set Tile Crete® PM Floor Mud (BOM #112521) Exterior Applications: Tile Crete® PM Exterior Floor Mud Underlayment Mix (BOM #112323)
-
Akona® Concrete Bonding Additive
Akona® Concrete Bonding Additive is an acrylic cement modifier that dramatically improves strength, adhesion, abrasion resistance and freeze-thaw resistance and is ideally suited for use with sand, mortar, cement mixes and selected Akona Repair Products. Akona Concrete Bonding Additive produces a patch that will adhere to old concrete and provides the adhesion required for thin overlays. Available in 1 gal. bottles (BOM #102659) and 1 qt. bottles (BOM #102658).
-
Akona® Crack-Resistant Surface Bonding Cement
Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).
-
Tenon® Concrete Resurfacer
Tenon® Concrete Resurfacer (BOM #120728) is a fast-setting, high-performance polymer-modified, cement-based product used for resurfacing old concrete to make it look new again. Applications from feather edge to ½ in. (2-13 mm). Fast-drying, walkable on average in 2 hours.
-
Akona® Instant Patching Cement
Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.
-
Akona® Polymer-Modified Concrete Resurfacer
Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).
-
Tenon® Feather Edge Pro
Tenon® Feather Edge Pro (BOM #120540) is a trowelable, rapid-setting, polymer-modified, self-drying, Portland cement-based patch and skim coating compound for multiple interior substrates. Specially formulated with superior workability for easy application, this non-sanded product results in an ultra-smooth finish and can be applied from feather-edge to ½ in. (13 mm) and is ideal for use as an embossing leveler. Fast-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry.
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. Available in 1 quart tub (BOM #103962) and 1 gallon pail (BOM #120713).
-
Sakrete® Fast Setting Self-Leveling Resurfacer
Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations.
-
TechPro® Heavy-Duty Stone Veneer Mortar
TechPro® Heavy-Duty Stone Veneer Mortar (BOM #120444) is a high-yield, lightweight, high-performance, polymer-modified, fiber-reinforced, Portland-cement based mortar for adhered installation of masonry veneer stone and natural stone. 25% lighter than traditional mortars with excellent non-sag and non-slump handling characteristics. Special admixtures help create both a mechanical and chemical bond to the substrate, significantly outperforming standard mortars. TechPro Heavy-Duty Stone Veneer Mortar is "Step 2" of the TechPro stone installation system used to create decorative exterior and non-load bearing interior veneer walls.
-
Sakrete® Flo-Coat Concrete Resurfacer
Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.
-
Akona® Self-Leveling Floor Underlayment Cement
Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.
-
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).
-
Tenon® Level-Flo® 100
Tenon® Level-Flo® 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-2" (3-51 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Akonaflex® Pro Self-Leveling Expansion Joint Filler
Akonaflex Pro Expansion Joint Filler is a superior-grade, one-component, MS polymer sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its semi-self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, patios, steps, garage floors, above ground foundations, and other concrete surfaces. Fills expansion joints up to 2.5 in. wide x 1.5 in. deep, and contains a unique, specially-formulated technology which allows it to be exposed to water after only 2 hours without washing out. Reaches full cure after 24 hours. Won’t crack or shrink and acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).
-
Tenon® Level-Flo® 200
Tenon® Level-Flo® 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floor coverings in 16-24 hours. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Tenon® Level-Flo® 300
Tenon® Level-Flo® 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications.
-
Akonakote® Pourable Concrete Patch
Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
-
Tenon® Mighty Bond™
Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526) and 55 gal. drums (BOM #130020).
-
Sakrete® Pourable Concrete Patch
Sakrete® Pourable Concrete Patch (BOM #120037) is a flowable, squeegee-grade, polymer-modified mix for patching and resurfacing concrete up to ½ inch depth.
-
Sakrete® Self-Leveling Underlayment
Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.
-
Sakrete® Top ‘n Bond Concrete Patcher
Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.
-
TechPro® Polymer-Modified Stone Veneer Base Coat
TechPro® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Can be applied over TechPro Moisture Barrier or directly to fully cured concrete.
-
Tenon® Pourable Concrete Patch
Tenon® Pourable Concrete Patch (BOM #120672) is a Portland cement-based, flowable, squeegee-grade, polymer-modified patching and resurfacing mix for interior and exterior horizontal concrete substrates. Easy to use, it corrects defects up to ½ in. (13 mm) on concrete surfaces prior to applying new flooring materials or coatings. Depending on application, can also be used as a wearable surface for residential and light duty commercial applications. Meets ASTM C387 “Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete” for normal weight concrete.
-
Tenon® Self-Leveling Resurfacer
Tenon® Self-Leveling Resurfacer (BOM #121017) is a polymer-modified, cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for light industrial floors where a hard, flat smooth surface and a quick return to service is desired. Also use as an underlayment for installation of ceramic tile, stone, resilient flooring, carpet, or other finished flooring. Typical substrates include: fully cured concrete, APA rated exterior grade/exposure 1 plywood or OSB underlayment grade equivalent with expanded wire lath reinforcement. Install from feather edge to 1 in. (25 mm) thick.
-
Tenon® Tile Crete® Floor Mud
Tenon® Tile Crete® Floor Mud Underlayment Mix is a blend of cementitious material and oven-dried sand designed to produce a highly-bondable substrate and to optimize consistency between batches. Use as a setting bed/underlayment for ceramic, mosaic, stone, quarry, and paver tile over concrete or wood substrates including countertops. Ideal for forming shower pans and curbs as well as installations requiring a slope to drain.
-
Tenon® Vinyl Concrete Patch
Tenon® Vinyl Concrete Patch a polymer-modified, Portland cement-based patching compound used to repair minor surface imperfections in concrete. Suitable for interior and exterior applications from feather-edge to 2 in. (51 mm) thick per lift. Typically supports foot traffic in 8-12 hours, wheeled traffic in 48 hours. Available in 10 lb. pail (BOM #127634) and 50 lb. bag (BOM #120681).
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).