DIY Repair
-
Akona® Power Patch Pro
Akona Power Patch Pro is a high-strength, non-sag, two component epoxy used to bond, repair, or fill blemishes in concrete, brick, wood, and stone and can be used for both overhead and vertical repairs. The application temperature range is between 40°F-100°F (4°C-38°C)
-
Akona® Wet/Cold Concrete & Masonry Loc
Akona® Wet/Cold Concrete & Masonry Loc is a two component, non-sag, high-performance anchoring adhesive for use down to 15°F (-9°C). Great for bonding new concrete to existing concrete, repairing structural cracks in concrete surfaces, and adhering dowel bars and tie bars for full depth concrete repairs.
-
Quikrete® FastSet™ All-Crete™
FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).
-
Quikrete® FastSet™ Repair Mortar
FastSet™ Repair Mortar demonstrates low sag, making it ideal for vertical or overhead repairs. FastSet™ Repair Mortar is also available with integral corrosion inhibitor in cases where maximum corrosion protection is desired. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product. This product can be built up […]
-
Quikrete® FastSet™ Water-Stop Cement
High Performance Cement FastSet™ Water-Stop Cement (BOM #113205) is a rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. FastSet™ Water-Stop Cement will block running water when application is made to masonry or concrete surfaces. This special formulation allows the product to obtain high strength and rapid setting while repelling water. FastSet™ Water-Stop Cement solves leakage problems wherever active water is present, in all masonry and concrete above and below grade. Use FastSet™ Water-Stop Cement for sealing around concrete pipes and for plugging leaks in: • Foundation and retaining walls • Chimneys • Swimming pools, fountains and cisterns
-
Rapid Patch® Hairline Crack Repair
Rapid Patch Hairline Crack Repair is a two-component, low-viscosity, 100% solids, urethane repair product designed for filling cracks in structural materials including concrete and bricks, for the purpose of bonding and sealing them. Product goes on black and dries gray. Designed for filling narrow cracks with maximum width of ¼ in. (6 mm) to a maximum depth of 6 in. (150 mm).
-
Rapid Patch® Rapid Loc™ Concrete & Veneer Bond
Rapid Patch® Rapid Loc™ Concrete & Veneer Bond is an innovative high-grab sealant which has high initial tack to hold materials in place while the adhesive cures, specifically designed for adhering stone, ceramic tile, and other construction materials to vertical surfaces. Rapid Loc Concrete & Veneer Bond is based on silyl-modified polymer technology that cures on exposure to atmospheric moisture to form a fast, tough, durable adhesive. Rapid Loc Concrete & Veneer Bond exhibits excellent adhesive properties to most common substrates including stone, brick veneer, aluminum, brass, vinyl, steel, stainless steel, glass, mirrors, mortar, concrete, wood, OSB, plywood, ceramic tile, brick, foam board, pavers, painted surfaces, fiberglass, and many plastics. Rapid Loc Concrete & Veneer Bond is highly weather resistant, remains flexible in low temperature extremes, and can be painted with most paints. Available in 9.5 oz. tube (BOM #130170).
-
Sakrete® Epoxy Tube Nozzles (3-Pack)
Sakrete® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 3 tubes per bag.
-
Rapid Patch® Concrete Repair Mortar
Rapid Patch® Concrete Repair Mortar (20 lb. BOM #129460, 50 lb. BOM#129470) is a fast-setting, high-performance, multi-use blend of hydraulic cement, polymers, fine aggregates, and special additives used for concrete repair and new construction where high early strength, excellent durability, and low shrinkage is required. Mix with water for applications from ½ in. minimum to 6 in. maximum thickness (1.3-15 cm).
-
Akona® Concrete Repair
Akona® Concrete Repair (BOM #103173) is a flexible, quick-drying, paintable filler and sealant for repairs to vertical and horizontal concrete, masonry, stone, and stucco surfaces. It's gray color and sanded texture is designed to blend in with most standard concrete surfaces.
-
TechMix® Concrete Mix
TechMix® Concrete Mix is a high strength pre-blended Portland cement mixture for pouring concrete 2 inches thick or greater. Used for general building and repairing steps, slabs, walks, and floors. Available in 60# bags (BOM #104879), 80# bags (BOM #104883) and 3,000# bags (BOM #112228).
-
Akona® Epoxy Crack Repair
Akona® Epoxy Crack Repair (BOM #120439) is a two-component, high-strength, 100% solids, epoxy repair product designed for injection into horizontal cracks in structural materials including concrete and bricks for the purpose of bonding and sealing. Special no-mess, self-mixing tube for easier application. Use to fill and bond narrow horizontal cracks up to 1/4" (6 mm) wide x 6" (150 mm) deep. Dries clear to light yellow color.
-
Quikrete® Re-Cap Concrete Resurfacer
Quikrete® Re-Cap™ Concrete Resurfacer (BOM #112421) is a special blend of portland cement, sand, polymer modifiers and other additives. Designed to provide a shrinkage compensated repair material for making thin repairs to sound concrete in need of surface renewal. Can be squeegee, trowel or brush applied.
-
Akona® Fast-Setting Anchoring Epoxy
Akona® Fast-Setting Anchoring Epoxy (BOM #120438) is a two-component, high-performance, 100% solids, high-modulus, non-sag gel epoxy designed for anchoring bolts, railings, dowels, and rebar steel into concrete and to bond or repair a variety of household and common building materials including concrete, porous tile, and stone. Special no-mess, self-mixing tube for easier application. Non-shrink, resistant to chemicals and solvents, this high-strength, fast-setting epoxy has a gel time in as little as 12-14 minutes; initial cure of 2 hours; and final cure time of 12-16 hours. Use both horizontal and vertical, up to 1/8" (3 mm) annular width and 10" (254 mm) depth. Because it is moisture tolerant, it is ideal for stopping air and water leaks. Gray in color.
-
Akona® Heavy-Duty Waterproofing Base Coat
Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).
-
Sakrete® Concrete Crack Filler
Sakrete® Concrete Crack Filler (BOM #120026) is a flowable, polymer-based crack filler for concrete. This repair material is designed to fill and seal cracks in concrete up to 1/4 in. wide and 1/4 in. deep.
-
Akona® Instant Anchoring Cement
Akona® Instant Anchoring Cement (BOM #102645) is a quick-setting, anchoring cement compound used for setting poles, railings, bolts and fixtures in concrete or masonry. Suitable for interior or exterior use, this product expands as it hardens to set securely and lock in place for strong support. Average set time = 20 minutes
-
Quikrete® FastSet™ Repair Mortar
Quikrete® FastSet Repair Mortar (BOM #109719) is specifically formulated to make structural repairs to any concrete, masonry or stucco surface. This low-sag formula has a 20-30 minute working time which allows for sculpting of the material during placement and makes it ideal for vertical and overhead repairs. Just add water, mix, and use to repair concrete, masonry, or stucco surfaces. Exceeds ASTM C 928 R-2. Compressive strength ASTM C109 modified: 3 hours=2,000 psi, 24 hours = 4,000 psi, 7 days = 5,000 psi, and 28 days = 6,000 psi.
-
Akona® Instant Patching Cement
Akona® Instant Patching Cement (BOM #102632) is a high-performance cement used for filling wide cracks and other concrete repair needs. It sets rock hard in just 90 minutes. Akona Instant Patching Cement self-bonds to all properly-prepared concrete surfaces and develops twice the strength of ordinary concrete.
-
Akona® Instant Water Stop
Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)
-
SAKRETE® Concrete Repair
Sakrete® Concrete Repair Tube (BOM#121099) is a weather-resistant, latex-based polymer used for filling cracks in concrete.
-
Akona® Mortar Repair
Akona® Mortar Repair (BOM #103174) is designed for tuck-pointing, repairing, and sealing mortar joints and cracks in masonry units such as stone, brick and block walls. The product is gray in color and designed to blend in with the texture of surrounding mortar. Our durable, pre-mixed Mortar Repair is a sanded, latex-based polymer formulation that dries quickly, is paintable, and provides superior adhesion to masonry.
-
Akona® Polymer-Modified Concrete Resurfacer
Akona® Polymer-Modified Concrete Resurfacer is a special, acrylic, polymer-modified cement used to resurface spalled and/or damaged interior and exterior concrete surfaces such as steps, patios, garage floors, and sidewalks. Akona Concrete Resurfacer bonds and dries to a concrete gray color. This high-strength product has superior bond and is trowelable to from 1/4 in. down to 1/8 in. (6 to 3 mm). It may be trowel or broom finished, and is available in a 25 lb. bag (BOM #102642).
-
Akona® Gray Pourable Concrete Crack Filler
Akona® Gray Pourable Concrete Crack Filler is a ready-mixed, easy-to-apply, pourable material for filling cracks up to ¼" deep x ¼" wide. Gray in color to blend with concrete surfaces and flexible to conform to movements of active cracks, Concrete Crack Filler is ideal for horizontal concrete surface such as driveways, sidewalks, patios and garage floors. Available in 1 gal. bottles (BOM #102639) and 1 qt. bottles (BOM #102638). For larger cracks and holes, use Akona Vinyl Cement Patch.
-
Akona® Pre-Mixed Concrete & Stucco Patch
Akona® Pre-Mixed Concrete & Stucco Patch is a water-based formula intended to patch minor cracks, holes, and surface defects in concrete or stucco. Product may also be used for residential repairs of masonry walls and re-applying small broken pieces of concrete or tuck pointing brick mortar joints. Pre-Mixed Concrete & Stucco Patch offers superior adhesion and may be used for vertical or horizontal patches. Available in 1 quart tub (BOM #103962) and 1 gallon pail (BOM #120713).
-
Sakrete® Flo-Coat Concrete Resurfacer
Sakrete® Flo-Coat Concrete Resurfacer (BOM #120034) is a polymer-modified sand and cement mix for resurfacing concrete from 1/8 inch to 1/4 inch depth. Can be applied in a flowable consistency using a squeegee or in a stiffer consistency using a trowel.
-
Quikrete® Sand Mix
Quikrete® Sand/Topping Mix (BOM #101231) consists of a uniformly-blended mixture of Portland cement, commercial-grade sands and other approved ingredients. Just add water and mix to repair or top damaged concrete surfaces less than 2" thick.
-
Tenon® Instant Anchoring Cement
Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected. Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).
-
Akona® Vinyl Cement Patch
Akona® Vinyl Cement Patch is ideally suited for repairs to damaged concrete steps, sidewalks, driveways, patios, curbs, walls and floors. This product contains unique polymers that give it twice the strength and three times the adhesion of conventional concrete. Just add water and mix for an easy-to-use product which can be troweled to a feather edge on interior and exterior concrete applications. For resurfacing large areas, use Akona Polymer-Modified Concrete Resurfacer. Akona® Vinyl Cement Patch is available in 3 convenient sizes: 10 lb bag (BOM #102633), 25 lb bag (BOM #102634), and 40 lb bag (BOM #104452).
-
Tenon® Instant Hydraulic Cement
Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners. Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails.
-
Akonaflex® Pro Self-Leveling Expansion Joint Filler
Akonaflex Pro Expansion Joint Filler is a superior-grade, one-component, MS polymer sealant and filler to be used in concrete joints as well as a wide variety of substrates. Its semi-self-leveling characteristics provide a smooth finish which makes it ideal for filling cracks or gaps on horizontal surfaces such as concrete driveways, sidewalks, patios, steps, garage floors, above ground foundations, and other concrete surfaces. Fills expansion joints up to 2.5 in. wide x 1.5 in. deep, and contains a unique, specially-formulated technology which allows it to be exposed to water after only 2 hours without washing out. Reaches full cure after 24 hours. Won’t crack or shrink and acts as an excellent waterproof seal. Available in 2 convenient sizes: 10 oz. tubes (BOM #104560); and 29 oz. tubes (BOM #120440).
-
Akonaflex® Self-Leveling Concrete Repair
Akonaflex® Self-Leveling Concrete Repair is a one-component, construction-grade, polyurethane, moisture-cure sealant designed to meet the flexibility requirements of dynamically moving joints. Self-leveling to result in a smooth, gray finish which is foot-traffic ready after 3 days and will reach full cure in 1 week. Fills and seals horizontal joints up to 1½"W x ½"D on concrete slabs, driveways, sidewalks, decks, pitch pans, pavers, garage floors, industrial floors and other concrete surfaces. Its premium-grade components give you a strong, durable, flexible, waterproof seal and leaves a finish that can be painted once cured with a latex paint. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant. Available in 2 convenient sizes: 10 oz. tubes (BOM #104562); and 29 oz. tubes (BOM #120456).
-
Akonakote® Pourable Concrete Patch
Akonakote® Pourable Concrete Patch (#104626) is a flowable, squeegee-grade, polymer-modified patching and resurfacing mix. This flowable, easy-to-use formula can be applied standing up to corrects defects on concrete surfaces prior to applying new flooring materials or coatings. Additionally, Pourable Concrete Patch can be used as a wearable surface in some applications. For deeper repairs over ½" in concrete floors, it is advisable to use Akona Instant Patching Cement prior to using this product.
-
Akonaseal® Non-Sag Masonry/Joint Sealant
Akonaseal® Masonry/Joint Sealant (BOM #104561) is a premium-grade, multipurpose, moisture-cure sealant, designed to meet the flexibility requirements of dynamically moving cracks and joints, this texturized, gray mortar-colored sealant is ideally suited for vertical concrete, stucco or masonry applications with a maximum joint of 1½"W x ¾"D and can be painted with a latex paint when cured. Complies with ASTM C920, Federal Specification TTS-00230C, and is VOC compliant.
-
Quikrete® Vinyl Concrete Patcher
Quikrete® Vinyl Concrete Patcher is a multi-purpose concrete repair material with strong adhesive properties which trowels to a feather edge of 1/16" (1.6 mm) and is made of a special blend of exterior-grade vinyl resin, fine sand, and Portland cement. Just add water. Available in 40 lb. bags (BOM #100472), 20 lb. pails (BOM #100131), and 10 lb. pails (BOM #109334).
-
Sakrete® Pre-Mixed Concrete Patch
Sakrete® Pre-Mixed Concrete Patch (BOM #120547) is used for filling and sealing cracks in concrete up to 1 inch wide. Smooth minor surface defects and holes.
-
Sakrete® Sand Mix
Sakrete® Sand Mix (BOM #100397) is a quality mixture of sand and cement designed to be used as a topping mix to rejuvenate damaged concrete surfaces or as a bedding mix and joint grout for flagstone, slate, and brick walkways. Sand Mix can be applied in layers ranging from ½ to 2 inches thick and exceeds the strength requirements of ASTM C 387. Just add water, mix, and use.
-
Sakrete® Top ‘n Bond Concrete Patcher
Sakrete® Top 'n Bond Concrete Patcher (BOM #120031 = 10 lb. / #120032 = 50 lb.) is a polymer-modified sand-cement repair mortar for resurfacing, patching, and general concrete repairs from ½ inch to featheredge. Requires only the addition of water.
-
Akona® Epoxy Tube Nozzles (2-Pack)
Akona® Epoxy Tube Nozzles are intended to provide customers additional nozzles for use with epoxy tube products. Both the original nozzle and the replacements are one-time use nozzles which should be discarded after use. This solves the issue when customers use only a portion of the product, but have to discard of the original one-time use nozzle. This product comes in packs of 2 tubes per bag.
-
TechPro® Stone Veneer Joint Grout
TechPro® Stone Veneer Joint Grout is a mixture of dry cementitious materials and dried sand designed to fill joints between real or manufactured stone veneer units. Preblended with air-entrainment admixtures to resist freeze-thaw conditions while increasing flow and durability. Specially formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Mix with water only. "Step 3" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Available in 4 colors to compliment or contrast veneer units: Gray (BOM #120446); Brown (BOM #120449); Tan (BOM #120448), White (BOM #120447); and Charcoal (BOM #130110).