Curing Agents

Akona^® Concrete Cure & Seal

Akona Concrete Cure & Seal is a clear, non-yellowing, waterborne, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly placed and/or existing concrete, pavers, brick, stone, and other cementitious materials. Concrete Cure & Seal is formulated to cure, seal, protect, and dustproof. Designed for both exterior and interior applications. The white solution dries clear and provides a dust-free surface. Concrete Cure & Seal provides maximum hardness to the concrete as well as resistance to traffic abrasion when applied to freshly placed concrete. Construction debris is easier to remove. It is compatible with most tile and carpet adhesives. On existing driveways, sidewalks, garage floors it provides protection from water penetration, salts, grease, etc. Available in a 1 gallon bottle (BOM #121281).

Tenon^® Cure & Harden

Tenon® Cure & Harden is a clear, water-based silicate-based curing, hardening, and dustproofing concrete sealer. Tenon® Cure & Harden penetrates into and reacts chemically within the capillaries of the concrete or masonry surfaces. It is suitable for use on freshly placed and finished concrete and in the renovation of aged concrete.

Tenon^® Cure & Seal ES

Tenon® Cure & Seal ES is a clear, non-yellowing, fast drying acrylic compound.  No Fillers, oils, waxes, or saponifiable resins are contained in the mixture.  It is used for curing and sealing of freshly-placed and /or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.  Cure & Seal ES forms a membrane film on new concrete to seal and retain hydrations water, providing maximum hardness of the substrate, resistance to abrasion, and resistance to damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases.  Cure & Seal ES will also benefit existing concrete by penetrating into the slab, binding together the small dusting particles, while filling the voids to produce a non-porous, dust-free, brighter surface.   When used on terrazzo, brick, stone, and architectural concrete, it brings out the highlights, enriches, and enhances the natural colors found in the material.

Tenon^® Dissipating Cure WB +PLUS

Tenon® Dissipating Cure WB +PLUS is a water-based, clear resin, liquid membrane forming, curing compound with silane used for moisture retention of freshly placed concrete. Designed for interior or exterior applications where a dissipating or easily removed curing compound is required. It is particularly recommended for applications where greater moisture retention is required . Tenon® Dissipating Cure WB +PLUS will pass all VOC compliance laws.

Tenon® Dissipating Cure WB +PLUS is available in 1 gal. bottle (BOM #114437), 5 gal. pail (BOM #114447), 55 gal. drum (BOM #114457), 275 gal. tote (BOM #114467) .

Tenon^® Hardener LS

Tenon® Hardener LS is a clear, water-based Lithium Silicate-based hardening, and dustproofing concrete sealer.  Tenon® Hardener LS deeply penetrates into the concrete surface and reacts chemically within the capillaries of the concrete surfaces.  The reaction forms a dense calcium silicate hydrate crystalline structure, providing a hard durable surface. It is suitable for use on recently finished concrete and in the renovation of aged concrete greater than 10 days old.

Tenon^® Salt Barrier ES

Tenon® Salt Barrier ES (Exempt Solvent) is designed to protect & extend the life of concrete, masonry, pavers, retaining walls and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier ES provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surface. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion, protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier ES is used for above-grade exterior applications that are not subject to hydrostatic pressure.

Tenon^® Trowel Ice

Tenon® Trowel Ice is a V.O.C. compliant finishing aid that enhances physical concrete surface performance, while aiding in faster and easier surface finishing. Tenon® Trowel Ice is reactive colloidal silicate densifier that lubricates freshly placed concrete, prolonging workability in adverse conditions, such as high wind, low humidity, or high ambient temperatures. Available in 1 gal. Ready-to-Use bottle (BOM #114864), 5 gal. Ready-to-Use pail (BOM #114866), 1 gal. Concentrated bottle (BOM #114865) and 5 gal. Concentrated pail (BOM #114867).

Tenon^® Ultimate Barrier ES

Tenon® Ultimate Barrier ES is a VOC compliant, clear, non-yellowing, fast drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon Ultimate Barrier ES is designed to be a single application for curing, sealing, and weatherproofing. Tenon® Ultimate Barrier ES forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion, damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases.

Tenon Ultimate Barrier ES reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion which moisture can cause. It is suitable for use to cure, protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials.

Tenon^® Concrete Surface Retarder

Tenon® Concrete Surface Retarder is a water-based, “Formula S’’ mixture that is applied to freshly placed concrete applications to chemically delay the setting of the mortar at the surface of the concrete. This allows the top layer of cement paste to be flushed away creating an exposed aggregate decorative finish without damaging the integrity of the concrete slab. A stream of water or scrubbing with a stiff brush is used to create the decorative texture. Surface Retarder can also be used on concrete to roughen or open the surface to improve the bonding for coatings or toppings. Available in 1 gallon bottles (BOM #121117) and 5 gallon pails (BOM #121118).

Tenon^® Cure & Seal WB 1315

Tenon® Cure & Seal WB 1315 is a film-forming compound that meets ASTM C1315 performance standards for water loss when applied properly to cure, seal, and harden freshly placed concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal WB 1315 will pass all VOC compliance laws and is formulated to cure, seal, protect, and dustproof concrete, as well as seal many types of porous tile and resilient floors. Designed for both exterior and interior applications, it is particularly recommended for indoor work in public buildings (hospitals, restaurants) and private residences where solvent-based systems are difficult to use. The white solution dries clear and provides a dust-free surface. This product provides maximum hardness to the concrete as well as resistance to traffic abrasion. Construction debris are easier to clean. Compatible with most tile and carpet adhesives.  Available in 1 gal. bottle (BOM #129910), 5 gal. pail (BOM #129920), and 55 gal. drum (BOM #129930).

Tenon^® Cure & Seal

Tenon® Cure & Seal is a non-yellowing, fast-drying acrylic compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete. Enhances colors, darkens the appearance of concrete, brick, stone, terrazzo, and exposed aggregate. Available in 1 gal. bottle (BOM #120839), 5 gal. pail (BOM #120838), or 55 gal. drum (BOM #120932).

Sakrete^® Cure ‘N Seal (WB)

Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon^® Cure & Seal WB

Tenon® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane forming compound used for curing, sealing, and hardening of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Waterborne mixture passes VOC compliance laws. Available in 1 gal. bottle (BOM #120823), 5 gal. pail (BOM #120822), and 55 gal. drum (BOM #120824).

Tenon^® Dissipating Cure 1315 WB

Tenon® Dissipating Cure 1315 WB is a water-based, clear resin, liquid membrane forming, curing compound used for moisture retention of freshly placed concrete. Tenon® Dissipating Cure 1315 WB is formulated for curing concrete. Designed for interior or exterior applications where a dissipating or easily removed curing compound is required. It is particularly recommended applications where greater moisture retention is required . Tenon® Dissipating Cure 1315 WB will pass all VOC compliance laws. Available in 5 gallon pails (BOM #113839), 55 gallon drums (BOM #113839), and 275 gallon totes (BOM #113838).

Tenon^® Wax Cure 1315 WB

Tenon® Wax Cure 1315 WB is a water-based, white pigmented, liquid membrane forming, wax curing compound used for moisture retention of freshly placed concrete. Tenon® Wax Cure 1315 WB is formulated for curing concrete. The addition of white pigment to the wax film reflects the heat of the sun to protect excess heat build-up. Designed for exterior applications, it is particularly recommended for roadways, airport runways, parking lots, and other pavement projects where greater moisture retention is required . Tenon® Wax Cure 1315 WB will pass all VOC compliance laws. Available in 5 gallon pails (BOM #113830), 55 gallon drums (BOM #113829), and 275 gallon totes (BOM #113828).

Tenon^® Wax Cure 309 WB

Tenon® Wax Cure 309 WB is a water-based, white pigmented, liquid membrane forming, wax curing compound used for moisture retention of freshly placed concrete. Tenon® Wax Cure 309 WB is formulated for curing concrete. The addition of white pigment to the wax film reflects the heat of the sun to protect excess heat build-up. Designed for exterior applications, it is particularly recommended for slip form , curb and gutter, and municipal sidewalk applications where minimum moisture retention is required. Tenon® Wax Cure 309 WB will pass all VOC compliance laws. Available in 50 lb. pails (BOM #113860), 55 gallon drums (BOM #113849), and 275 gallon totes (BOM #113851).

Sakrete^® Form Release Oil

Sakrete® Form Release Oil (BOM #120044) is a release agent for use with concrete forms. Allows forms to be removed earlier and easier, yet has only a light residue.

Tenon^® Siloxane Final Seal

Tenon® Siloxane Final Seal is an aromatic, solvent-based concrete sealer/water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottle (BOM #120828), 5 gal. pail (BOM #120827), and 55 gal. drum (BOM #120829).

Tenon^® Siloxane Sealer

Tenon® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection.  Available in 1 gal. bottle (BOM #120826), 5 gal. pail (BOM #120825), and 55 gal. drum (BOM #120829).

Tenon^® Super Clear Coat

Tenon® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnish block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances the colors of the surfaces with a rich "wet-look" sheen. Available in 1 gal. bottle (BOM #120831), 5 gal. pail (BOM #120830), and 55 gal. drum (BOM #120832).

Tenon^® Super Clear Coat Matte

Tenon® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun's UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low gloss finish. Available in 1 gal. bottle (BOM #120834), and 5 gal. pail (BOM #120833).

Tenon^® Super Diamond Glaze

Tenon® Super Diamond Glaze is a higher viscosity version of Super Clear Coat used for curing and sealing exposed aggregate and sealing colored concrete. Enhances the beauty and depth of the surface, giving it a rich "wet-look" high gloss while protecting from the damages caused by moisture penetration. Available in 1 gal. bottle (BOM #120836), 5 gal. pail (BOM #120835), and 55 gal. drum (BOM #120837).