Water Repellents

Tenon^® Ultimate Barrier ES

Tenon® Ultimate Barrier ES is a VOC compliant, clear, non-yellowing, fast drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly-placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon Ultimate Barrier ES is designed to be a single application for curing, sealing, and weatherproofing. Tenon® Ultimate Barrier ES forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion, damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases.

Tenon Ultimate Barrier ES reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion which moisture can cause. It is suitable for use to cure, protect, and seal fully-cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials.

Tenon^® Concrete & Masonry Sealer WB

Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully-cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gallon bottles (BOM #120673) and 5 gallon pails (BOM #120674).

Sakrete^® Cure ‘N Seal (WB)

Sakrete® Cure 'N Seal (WB) (BOM #120045) is a clear, non-yellowing, waterborne, acrylic polymer modified resin compound used for curing, sealing, and hardening freshly placed concrete. Also used to seal, protect, and dustproof existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials.

Tenon^® TraxGrip

Tenon® TraxGrip gives a light texture to concrete flatwork for a slip-resistant surface. Often used commercially on entrance floors, garage floors, steps, patios, walkways, and any surface where additional texture is desired to increase non-slip characteristics. TraxGrip is an optically clear thermoset polymer resin. Nearly invisible on the applied floor surface, it is added to curing and sealing compounds then applied to surfaces in the liquid solution. Available in 3.2 oz (BOM #114637) and 1 lb. (BOM #114638)