Cements
-
Quikrete® FastSet™ Concrete Mix
QUIKRETE® FastSet™ Concrete Mix (BOM #113204) is a fast-setting, high early strength concrete designed to build or repair concrete sidewalks, driveways, highways, bridge decks, concrete parking lots and concrete floors. Use at any thickness from 2 in to 24 in (50 mm to 610 mm). FastSet™ Concrete has less shrinkage than ordinary Portland cement concrete. The addition of corrosion inhibitor has no adverse effect on the other physical properties of the product.
-
Tenon® Masonry Cement
Tenon® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #114094) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #114095) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #114096) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.
-
Tenon® Blend-Pro™
Tenon® Blend-Pro™ is a fast-setting, one component, polymer-modified, calcium aluminate cement-based concrete and masonry patching compound designed for vertical and overhead repair applications.
Available in #3-15 Light Gray (BOM# 113529, 121158), #3-30 Light Gray (BOM# 113532, 114797). -
TechMix® Portland Cement – Type III
Designed for use in a variety of applications, TechMix Portland Type III Cements (BOM #100722) are manufactured to meet virtually any construction challenge and meets all requirements as outlined in ASTM C150. Portland Type III Cements provides high early strength and are ideally suited for a variety of concrete construction applications. Type III is often used for those jobs where a structure must be put into service quickly, or when forms need to be removed as soon as possible, such as pre-cast or pre-stress applications.
-
TechMix® Masonry Cement
Tech Mix® Masonry Cement is designed to be mixed with masonry sand to create masonry mortar for various applications such as brick and stone. Type N Masonry Cement (BOM #100920) is used for non-structural, above-grade applications such as setting brick or stone veneer and comes in a 70 lb. bag. Type S Masonry Cement (BOM #100917) is designed for structural above-grade or below-grade application and comes in a 75 lb. bag. Type M Masonry Cement (BOM #100868) is used for structural, below-grade, load-bearing walls where higher compressive strengths are needed and comes in a 70 lb. bag.
-
Akona® Medium-Duty Refractory Mortar
Akona® Medium-Duty Refractory Mortar (BOM #104319) is a dry, preblended mortar ideally suited for setting masonry units in fireplaces (outdoor or indoor), fire pits, BBQ's, or chimney applications such as setting clay flue liners. Our refractory mortar is air-entrained for freeze-thaw resistance, offers great workability, high strength, and a one-hour working time. Good for temperatures up to 2,550°F and has passed ASTM C199, ASTM C1283, and ASTM E136.
-
TechMix® Portland-Limestone Cement – Type IL
Tech-Mix® Portland-Limestone Cement IL is used to make concrete for a variety of building construction, repairs, stucco, or mortar applications such as sidewalks, floors, footings, patios, and setting posts, block, and brick. Tech-Mix Portland-Limestone Cement is available in 92.6 lb. bags (BOM #100908), 46.2 lb. bags (BOM #100910), and 2000 lb. bags (BOM #108140).
-
Tenon® Instant Anchoring Cement
Tenon® Instant Anchoring Cement is a quick-setting, anchoring cement compound used for setting poles, railings, bolts, and fixtures in concrete or masonry. Suitable for interior or exterior use. Expands as it hardens to set securely and lock in place for strong support. Any metals that will corrode when exposed to wet cement, such as aluminum, must be protected. Available in 10 lb. (BOM #129940) and 50 lb. pails (BOM #120998).
-
Techmix® White Portland-Limestone Cement – Type 1
TechMix® White Portland-Limestone Cement – Type I (BOM #112770) is used to produce a wide variety of architectural concrete products and applications. General applications include cast in place or precast wall panels, floors, slabs, terrazzo, thin set and tile grouts, cast stone, masonry units and mortars, stucco, swimming pools & spas, glass fiber reinforced concrete, ornamental statuary, floor tiles, concrete roof tiles, perimeter security, pavers and traffic safety items such as concrete median barriers, bridge parapets, pedestrian crosswalks, curbs and other delineators. White cement is often used to produce bright finishes, vibrant colors or ultra-high performance concretes that look great and provide structural performance that make them ideal for resilient building applications. White Portland-Limestone Cement meets ASTM C150 Standard Specification for Portland Cement, as well as AASHTO M85 and CSA A3001 specifications.
-
Sakrete® Portland Cement Type IL
Sakrete® Portland Cement (BOM #120022) is a Type IL gray cement. A basic building material, when blended with sand, stone or gravel it is used for pavement, sidewalks, slabs and more.
-
Tenon® Refractory Mortar
Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours.
-
Tenon® Rub-Pro™
Tenon® Rub-Pro is a one-component, polymer-modified, Portland cement-based, interior and exterior resurfacer designed for smoothing and filling vertical and overhead concrete and masonry surfaces. Available in #3 light gray bag (BOM #128180) and light gray pail (BOM# 121153).