Underlayments
-
Quikrete® FastSet™ Self-Leveling Floor Resurfacer
High Performance Cement FastSet™ Self-Leveling Floor Resurfacer (BOM #110439) is a self-finishing interior & exterior floor topping and underlayment specially formulated to work without troweling. High Performance Cement FastSet™ Self-Leveling Floor Resurfacer produces a smooth surface ready for the installation of ceramic tile, resilient flooring, carpet or other finishes. FastSet™ Self-Leveling Floor Resurfacer can also be used as a wear surface for light duty industrial floors. Following are typical substrates: • Precast concrete plank • New concrete floor slabs with unacceptable finishes • Existing concrete floors with damaged finishes • Over wood floor systems, utilizing expanded metal lath reinforcement • FastSet™ Self-Leveling Floor Resurfacer may be used for outdoor service
-
Akona® Crack-Resistant Surface Bonding Cement
Akona® Crack-Resistant Surface Bonding Cement is a specially-formulated, multi-use product. It can be used to build and restore retaining walls or block walls, patch large vertical holes where non-sagging cement is a must, or repair deteriorated stucco. Because it contains special fibers it will not shrink, crack, or sag on a vertical repair. It also provides additional overall strength over conventional concrete. Available in Gray (BOM #102614).
-
Akona® Heavy-Duty Waterproofing Base Coat
Akona® Heavy-Duty Waterproofing Base Coat (BOM #102624) is a Portland cement-based, waterproof coating for use over concrete, block, brick or stucco surfaces. Use for interior or exterior coating of foundation, basement or retaining walls below or above grade. When applied over non-uniform areas, this product provides a smooth or textured surface that can be left as a finished decorative coating. In addition, this product can serve as a base coat for paint or similar faux finishes. Please note that this product needs to be mixed with a mixture of water and Akona Concrete Bonding Additive (sold separately, BOM #102659).
-
Tenon® Feather Patch Pro
Tenon® Feather Patch Pro is a fast-setting, polymer-modified, self-drying, cement-based patch and skim coating compound for interior use under ceramic tile, hardwood flooring, carpet and a wide array of floor coverings. Ideal for deeper patching, this product can be applied from feather-edge to 2 in. (51 mm) thick. Formulated for exceptional bond strength and superior workability, can be applied to concrete with a relative humidity (RH) up to 90%. Rapid-setting, with initial set in 15 minutes; can accept ceramic tile and stone applications, as well as moisture-sensitive floor coverings, in as little as 30 minutes or when completely dry. Available in 10 lb. (4.5 kg) pails (BOM #120618), and 25 lb. (11.3 kg) pails (BOM #120541).
-
Sakrete® Fast Setting Self-Leveling Resurfacer
Sakrete® Fast Setting Self-Leveling Resurfacer (BOM #120423) is a rapid setting cement-based product for resurfacing concrete floors with damaged finishes or as a wear surface for residential and light foot traffic industrial floors where a hard, flat, and smooth surface is desired. Applications from 1/8" to 1" and can be featheredged to adjoining elevations.
-
Akona® Self-Leveling Floor Underlayment Cement
Akona® Self-Leveling Floor Underlayment Cement (BOM #104623) is a free-flowing mortar for use where a level surface is necessary prior to installing floor coverings. This ground-breaking formula has a dry, integral primer mixed so you no longer need to spend the additional money, time, and labor on adding an additional primer liquid. Our Self-Leveling Floor Underlayment Cement requires a minimum amount of labor to produce a smooth, level surface that is ready for installing floor coverings such as ceramic tile, marble, wood and carpet within 24 hours and resilient flooring after 72 hours. It is also ideal for encapsulate radiant heating installations. This product is designed for interior applications from ⅛" up to 1" thick.
-
Quikrete® Stucco Base – Pump Grade
Quikrete® Base Coat Stucco - Pump Grade is a Portland cement based stucco, designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application. This product contains special additives which prevent premature loss of mixing water and provide increased workability. This product is intended for use over galvanized expanded metal lath or solid bases such as masonry, cast-in-place or precast concrete. Available in 80# bags (BOM #104298) and 3000# bulk bags (BOM #104346).
-
Quikrete® Stucco Base Coat – Scratch & Brown
Quikrete® Scratch and Brown Base Coat Stucco (BOM #103191) is a Portland cement-based stucco designed to be used as the scratch and/or brown coat in a 3-coat stucco application, or the first coat in a 2-coat application.
-
Tenon® Level-Flo® 100
Tenon® Level-Flo® 100 (BOM #120534) is a Portland cement-based, self-leveling underlayment used to level and smooth interior floors for finished floor covering installation. Can be applied from ⅛"-2" (3-51 mm) neat and up to 5" (127 mm) extended.. Accepts non-moisture sensitive tile and stone in as little as 24 hours, and moisture sensitive floor coverings in 3 days. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Tenon® Level-Flo® 200
Tenon® Level-Flo® 200 (BOM #120535) is a high-performance, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. Can be applied from ⅛"-2" (3-51mm) neat, and up to 5" (127 mm) extended. Fast-setting, accepts non-moisture sensitive tile and stone in as little as 4 hours, and moisture sensitive floor coverings in 16-24 hours. Use with Level-Flo Primer Pro to level and smooth over many interior substrates including concrete, existing ceramic tile, non-water soluble adhesive residue, and solid wood floors.
-
Tenon® Level-Flo® 300
Tenon® Level-Flo® 300 (BOM #120536) is a high-performance, high-strength, fiber-reinforced, non-gypsum based, self-leveling underlayment that provides a flat, extremely smooth, durable surface for finished floor covering installation. It’s designed for maximum flow and seamless merging with every pour and is ideal for fast track applications.
-
TechPro® Moisture Barrier
TechPro® Moisture Barrier (BOM #127610) is an advanced, latex, polymer-based technology used as a water-resistant membrane applied to all wood or moisture-sensitive backup walls prior to application of TechPro Polymer-Modified Stone Veneer Base Coat. Ready to use (no mixing required), with exceptional flexibility and elongation, solvent free and VOC compliant, TechPro Moisture Barrier is part of the TechPro veneer stone installation system. Color will be light orange when applied, dries to dark orange.
-
Sakrete® Self-Leveling Underlayment
Sakrete® Self-Leveling Underlayment (BOM #120035) is a polymer-modified Portland cement based self-leveling underlayment for interior applications up to 1 inch in a single pour. For use over properly prepared concrete and plywood floors. Can be used under ceramic tile, stone, carpeting, VCT, wood flooring and other materials. Not designed as a direct wearing surface. May also be used to encapsulate radiant heating installations.
-
TechPro® Polymer-Modified Stone Veneer Base Coat
TechPro® Polymer-Modified Stone Veneer Base Coat (BOM #120442) is used as a scratch and base coat for real or manufactured stone veneer units. Also referred to as a cement plaster coating, it is a blend of cementitious materials, dried sand, and special performance admixtures designed to produce a highly-bondable substrate and to optimize consistency between batches. Special admixtures help create both a mechanical and chemical bond to the substrate with excellent workability and non-sag performance. Polymer-modified, mix with water only. "Step 1" of the TechPro stone veneer installation system used to create decorative exterior or non-load bearing interior veneer walls. Can be applied over TechPro Moisture Barrier or directly to fully cured concrete.
-
Tenon® Waterproofing & Crack Isolation Membrane
Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied, dries to dark orange. Available in 1 gal. pail (BOM #120675) and 5 gal. (BOM #120676).