Specialty
-
NorthRock® Edge Loc
NorthRock Edge Loc Superior Concrete Paver Edging is a specially formulated blend of hydraulic cement, graded aggregates, polymers, fibers and performance admixtures. It is designed to provide lateral support and stability to paver installations. The polymer-modified fiber-reinforced formula is designed to be freeze-thaw durable and flexible enough to accommodate soil movements without deteriorating. Easy, just add water formulation. Available in a 25 lb. pail (BOM# 114321) and a 50 lb. bag (BOM# 114874).
-
Quikrete® FastSet™ All-Crete™
FastSet™ All-Crete™ is a dual-purpose product. As a non-metallic fluid grout meeting ASTM C1107, it is used for anchoring and grouting of anchor bolts, retrofitted reinforcing steel, steel column bases, bearing plates, precast concrete key ways and other installations that require high early and high ultimate strength. Non-shrink characteristics make it stable and capable of handling load transfers. As a repair material, the product meets ASTM C928 R3 and is used to make partial depth or full depth repairs to roads, bridges, industrial floors and other concrete surfaces. Available in 20 lb. pails (BOM #113202) and 55 lb. bags (BOM #113203).
-
Tenon® FormGuard
Tenon® FormGuard is a V.O.C. compliant, ready-to-use, petroleum based, chemically reactive liquid concrete form release agent. Tenon FormGuard effectively prevents bonding of concrete to forms and formliners. Use of Tenon FormGuard regularly will increase the life of all forms. Tenon FormGuard can be used on forms such as steel, aluminum, fiberglass-reinforced, all grades of plywood, epoxy-coated, and urethane-coated.
-
Akona® Fast-Setting Anchoring Epoxy
Akona® Fast-Setting Anchoring Epoxy (BOM #120438) is a two-component, high-performance, 100% solids, high-modulus, non-sag gel epoxy designed for anchoring bolts, railings, dowels, and rebar steel into concrete and to bond or repair a variety of household and common building materials including concrete, porous tile, and stone. Special no-mess, self-mixing tube for easier application. Non-shrink, resistant to chemicals and solvents, this high-strength, fast-setting epoxy has a gel time in as little as 12-14 minutes; initial cure of 2 hours; and final cure time of 12-16 hours. Use both horizontal and vertical, up to 1/8" (3 mm) annular width and 10" (254 mm) depth. Because it is moisture tolerant, it is ideal for stopping air and water leaks. Gray in color.
-
Akona® Instant Post Cement
Akona® Instant Post Cement (BOM #102631) is used for quick setting of all metal, wood and plastic fence, mailbox, basketball and swing set posts. This product does not require pre-mixing prior to use. Simply pour dry mix into the hole with water as directed. Instant Post Cement does not require bracing and sets in approximately 10-20 minutes. Akona Instant Post Cement is not designed to be used for footings or structural supports.
-
Akona® Instant Water Stop
Akona® Instant Water Stop is a quick-setting, hydraulic cement compound used primarily as a water stop or hole filler on concrete or masonry materials. It is formulated to expand when set and locks into place to block flowing water within 3 to 5 minutes. Instant Water Stop bonds to wet walls and is ideal for patching cracks and leaks in swimming pools and is available in 10 lb. bags (BOM #102635) and 25 lb. bags (BOM #102636)
-
Tenon® Instant Hydraulic Cement
Tenon® Instant Hydraulic Cement is a quick-setting hydraulic cement compound used primarily as a water stop or hole filler. It expands when set and locks into place to block flowing water in 3 to 5 minutes. For use only on concrete and masonry materials. Best for repairing leaks in cracks between blocks or on one surface, not for stopping water flow in corners. Available in 10 lb. (BOM #129950) and 50 lb. (BOM #128280) pails.
-
Akona® Glass Block Mortar
Akona® Glass Block Mortar (BOM # 102627) is a specially-formulated blend of select white silica sands, white cement and workability agents which result in an easy-to-handle, high strength mortar. It is designed for installing glass block windows, shower and bath walls or masonry units where a white mortar is desired. This product is suitable for both interior and exterior applications.
-
Sakrete® High Strength Anchoring Epoxy
Sakrete® High Strength Anchoring Epoxy (BOM #129427) is a two-component epoxy compound that cures to an exceptionally strong, hard product. This unique formulation provides an excellent balance of mixability and flow without run-out to allow for the fastening and anchoring of both vertical and horizontal fixtures into masonry.
-
Sakrete® Leak Stopper Hydraulic Cement
Sakrete® Leak Stopper Hydraulic Cement (BOM #120030) stops the flow of water through breaks in concrete or masonry walls and floors. Rapid setting, with initial set-time of 1-3 minutes, and final set in 3-4 minutes.
-
Sakrete® Rapid Setting Anchoring Epoxy
Sakrete® Rapid Setting Anchoring Epoxy (BOM #129428) is a two-component epoxy compound used to anchor bolts or other metal objects in concrete and masonry. A rapid setting material that can be used in vertical or horizontal applications. Its rapid set allows for use in walls with minimal run-out.
-
Tenon® Refractory Mortar
Tenon® Refractory Mortar is a specially-engineered blend of specific cements and aggregates giving the mortar unique heat-resistance and thermal characteristics for use in high-temperature applications such as inside fire pit rings, setting chimney clay flue liners, parging a smoke chimney chamber, and setting fire bricks. Passes ASTM C 199 for mortar temperature limits to 2,550°F for a minimum of 6 hours.