Tenon® Construction Grout
Tenon® Construction Grout is a non-shrink, non-metallic, Portland-limestone cement-based mixture of hydraulic cement, aggregate, and additives for general purpose structural grouting. Meets or exceeds ASTM C-1107. Available in 50 lb. bags (BOM #120720) and 3000 lb. bags (BOM #113219).
Tenon® High Strength Precision Grout
Tenon® High Strength Precision Grout (BOM #120707) is a ready-to-use, high-strength, flowable precision grout mix with excellent working time and early strength ensuring quick job startups and reducing cost. This specially-formulated mix can be pumped into areas inaccessible by conventional grouting methods. High Strength Precision Grout is a non-shrink, non-metallic, non-staining, non-porous, high-density, pumpable formula designed for precision grouting applications and can be extended with the proper aggregates up to 50%.
- Highly-fluid grout with excellent working time and early strength
- Non-shrink, non-corrosive, non-staining, non-porous, and non-metallic
- Applicable Standards: ASTM C-1107 and CRD-C 621
Tenon® Masonry Veneer Joint Grout
Tenon® Masonry Veneer Joint Grout is blend of dry, cementitious materials, performance admixtures, and dried sand specifically designed to fill or tuck-point the joints between artificial stone, brick, masonry, and natural stone in veneer systems. Preblended with air-entrainment admixtures to resist freeze-thaw conditions, while increasing flow and durability. Tenon Pro Veneer Technology (PVT) creates a high-performance professional grout, formulated for clean installation and flow properties to eliminate clogging when using a grout bag. Available in: Natural Gray (BOM #120463); White (BOM #120464); Tan (BOM #120465); and Brown (BOM #120466).
Tenon® Rapid Strength Construction Grout LT
Tenon® Rapid Strength Construction Grout LT is a uniquely formulated non-corrosive, cementitious, flowable construction grout. It is designed for extreme duty applications where early strength, fast setting strengths at low temperatures are required.
Tenon® Thermaseal® Geothermal Grout
Tenon® Thermaseal® Geothermal Grout is a a thermally-conductive cementitious grout engineered for application of vertical and horizontal ground source heat pumps and geothermal well fields. Non-toxic and non-shrink with a high solids content and a low-permeability factor making it ideal for ground source heat loops and safe for contact with potable ground water. A blend of thermally-conductive sand with Portland cement for a range of thermal conductivities depending on design requirements. Thermaseal Geothermal Grout also offers low-absorption with a rigid seal to prevent integration of aquifers and is made in three versions, MN Mix (BOM #121014), and 0.75 HF (high-flow) (BOM 129569).
Tenon® Ultra High Strength Precision Grout
Tenon®Ultra High Strength Precision Grout is a uniquely formulated cementitious, flowable precision grout. It is designed for extreme duty applications where high early strength and extremely high finish strengths are required. Available in 50 lb. bag (BOM #114200).